9091603154 NEW Engine Coolant Thermostat for Toyota

Name: 9091603154 NEW Engine Coolant Thermostat for Toyota
Brand: fobautoparts

Verified fitment

Fits these vehicles

Applications confirmed against OE 9091603154. Confirm your model and year before ordering.

Make

Model

Year

Engine

TOYOTA

AURIS (_E18_) 1.2 (NRE185_/ NRE185R)

2015.03-2018.12

TOYOTA

AURIS ESTATE _E18_ 1.2 NRE185_/ NRE185R/ NRE185H

2015.03-2018.12

TOYOTA

C-HR (_X1_) 1.2 (NGX10_/ NGX10R)/1.2 4WD (NGX50)/1.2 4WD (NGX50_/ NGX50R)

2016.10

TOYOTA

COROLLA HATCHBACK (_E21_/ _EA1_/ _EH1_) 1.2 (NRE210)/1.2 4WD (NRE214H)

2019.01

TOYOTA

COROLLA ESTATE (_E21_) 1.2 (NRE210)

2019.02

Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.

Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Toyota Corolla Estate 512 Toyota Auris 300 Toyota Auris Estate 179 Toyota Corolla Hatchback 119 Toyota C-hr 94

Specifications

Technical parameters

MaterialPlastic/Rubber

BrandFobautoparts

CategoryThermostat

MOQ100 pcs

Place of originZhejiang, China

PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ

OE / reference numbers

9091603154909160315490916-03154

ShippingDHL / UPS / FedEx / Aramex / Sea freight

DeliveryConfirmed in the quotation or order confirmation

WarrantyAs stated in the quotation or order terms

ServiceOEM / ODM custom service, private label and packaging

PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance

Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.

Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.

Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.

Product details

About this part

9091603154 engine coolant thermostat for Toyota. The thermostat controls coolant flow between the engine and the radiator, holding the engine at its design temperature once warm and opening fully when the load rises.

The part is a wax element thermostat in a metal frame with a rubber seal, opening at the temperature stamped on the flange. The wax capsule expands as the coolant warms, pushing the main valve open against the return spring, and a small bleed hole or jiggle pin allows air to pass while the system is being filled. The seal sits in a machined groove in the housing, and on many Toyota engines the thermostat is held by the housing bolts rather than by a separate retaining ring.

Fitment is Toyota petrol engines that use this number, and the gasket or rubber seal should always be renewed at the same time. Drain the coolant below the housing level, remove the housing bolts, lift out the old thermostat and note which way the bleed hole faces, then fit the new one in the same orientation. Refill slowly with the heater set to hot and bleed the system before the engine is run up to temperature.

Faults are an engine that never reaches normal temperature, a heater that blows cold at idle, a temperature gauge that climbs in traffic and falls on the open road, and a cooling fan that runs constantly. A thermostat stuck open costs fuel and causes condensation in the oil; one stuck closed leads to overheating and, on an aluminium engine, to head gasket damage. Overheating can also come from a failed fan clutch or a blocked radiator, so confirm the thermostat is the cause before replacing it.

Each thermostat is checked for opening temperature and full lift travel in a heated bath. The rubber seal is included.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.