A2059052910 Fuel Level Sender Unit For Mercedes-Benz

Name: A2059052910 Fuel Level Sender Unit For Mercedes-Benz C-CLASS 2014-2020
Brand: fobautoparts
SKU: FOB-C80926

Verified fitment

Fits these vehicles

Applications confirmed against OE A2059052910. Confirm your model and year before ordering.

Make

Model

Year

Engine

MERCEDES-BENZ

C-CLASS (W205)

2014.10-2020.11

Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.

Specifications

Technical parameters

MaterialMetal & Plastic

BrandFobautoparts

CategoryFuel Level Sensor

MOQ100 pcs

Place of originZhejiang, China

PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ

OE / reference numbers

A2059052910

ShippingDHL / UPS / FedEx / Aramex / Sea freight

DeliveryConfirmed in the quotation or order confirmation

WarrantyAs stated in the quotation or order terms

ServiceOEM / ODM custom service, private label and packaging

PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance

Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.

Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.

Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.

Product details

About this part

A2059052910 is the number to quote for this fuel level sender unit, the replacement unit used on MERCEDES-BENZ C-CLASS.

The unit sits on the tank flange with the float arm reaching down into the tank, and the connector on top carries the gauge signal to the body module. This part restores the gauge reading across the whole sweep rather than just at the top and bottom of the tank.

The fitment we have confirmed runs 2014.10 to 2020.11, and it is the single reference listed in the table, so check the chassis code before you order.

The flange gasket is supplied with the unit, and the terminals are tin plated against the damp atmosphere inside a tank. The resistor track is a thick film printed element, which wears far more slowly than the wire wound tracks used on older senders.

A gauge that sits at full for a hundred kilometres and then falls sharply is a worn track, not a wiring fault. A needle that jumps when the car goes over a bump is the wiper losing contact with the track. Reading empty with fuel in the tank, and a low fuel warning that comes on early, both point at the sender.

After fitting, fill the tank and check the gauge reads full before handing the car back. Access is usually under the rear seat or through the tank flange; release fuel pressure before opening the tank. Match the float arm length to the old unit before fitting, and check the sweep does not foul the tank wall. Samples are available before a bulk order, and private label packing can be arranged.

Any doubt about A2059052910 fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.