AC Compressor 926001HC2B for Nissan Versa/Versa Note

Name: AC Compressor 926001HC2B for Nissan Versa/Versa Note (N17/E12) 2014-2019 1.6L
Brand: fobautoparts

Verified fitment

Fits these vehicles

Applications confirmed against OE 926001HC2B. Confirm your model and year before ordering.

Make

Model

Year

Engine

NISSAN

BLUEBIRD SYLPHY / SYLPHY III (B17) 1.6

2013.05

NISSAN

JUKE (F15) 1.6

2010.06-2019.12

NISSAN

JUKE Van (F15) CVTC

2013.03-2019.12

NISSAN

MAXIMA / MAXIMA QX IV (A32) 3.0

1995.01-2000.08

NISSAN

MICRA II (K11) 1.4 i 16V (AK11)

2000.09-2003.02

NISSAN

MICRA IV (K13K/ K13KK) 1.2 DIG-S

2010.05-2020.10

NISSAN

NOTE (E12) 1.2

2012.08-2016.12

NISSAN

PATHFINDER IV (R52) 3.5 4WD

2014.08

NISSAN

PULSAR Hatchback (C13) 1.6 CVTC

2012.08

NISSAN

SENTRA VII (B17) 1.6

2014.08

Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.

Specifications

Technical parameters

MaterialPlastic/Rubber

BrandFobautoparts

CategoryAC Compressor

MOQ10 pcs

Place of originZhejiang, China

PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ

OE / reference numbers

926001HC2B

ShippingDHL / UPS / FedEx / Aramex / Sea freight

DeliveryConfirmed in the quotation or order confirmation

WarrantyAs stated in the quotation or order terms

ServiceOEM / ODM custom service, private label and packaging

PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance

Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.

Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.

Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.

Product details

About this part

The number 926001HC2B identifies this air conditioning compressor, which fits NISSAN BLUEBIRD SYLPHY / SYLPHY III, JUKE and JUKE Van as set out in the fitment table.

Replacing the compressor restores system pressure, but the receiver drier and the expansion valve have to be renewed at the same time or the new unit will not last. The compressor is driven by the engine belt through an electromagnetic clutch, and it is the only part of the system that does the work of moving refrigerant.

The fitment we have confirmed runs from 1995.01 to 2020.10, split across 10 references in the table, so check the chassis code against the list before you order.

The mounting ears and the hose ports match the original part, and the ports are capped against moisture until the system is opened. Internal clearances are set on the line, which is why the unit does not have to be shimmed on fitting.

A squeal on engagement that goes away once the clutch is fully in points at the belt or the clutch air gap. Cold air that fades as the engine speed rises is a sign of a compressor that is worn internally rather than a refrigerant leak. Metal debris in the system means the compressor has failed internally, and the condenser and the expansion valve have to be flushed or replaced.

Evacuate the system for at least 45 minutes before charging, and leak test at the ports after charging. Check the clutch air gap and the belt alignment after fitting, and confirm the pressures at idle and at 2000 rpm. Flush the system and replace the receiver drier and the expansion valve whenever a compressor is replaced, or the debris will destroy the new unit. The compressor is packed with the ports capped, in a carton with foam corners.

Order 926001HC2B by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.