AC Compressor 92610JM01C for Nissan Rogue/Renault Koleos

Name: AC Compressor 92610JM01C for Nissan Rogue/Renault Koleos (S35/H45) 2008-2015 2.5L
Brand: fobautoparts

Verified fitment

Fits these vehicles

Applications confirmed against OE 92610JM01C. Confirm your model and year before ordering.

Make

Model

Year

Engine

NISSAN

Rogue/Renault Koleos (S35/H45)

2008-2015

2.5L

Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.

Specifications

Technical parameters

MaterialPlastic/Rubber

BrandFobautoparts

CategoryAC Compressor

MOQ10 pcs

Place of originZhejiang, China

PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ

OE / reference numbers

92610JM01C

ShippingDHL / UPS / FedEx / Aramex / Sea freight

DeliveryConfirmed in the quotation or order confirmation

WarrantyAs stated in the quotation or order terms

ServiceOEM / ODM custom service, private label and packaging

PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance

Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.

Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.

Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.

Product details

About this part

Part number 92610JM01C: a air conditioning compressor assembly that replaces the original unit on NISSAN Rogue/Renault Koleos with no drilling and no adapter.

The unit draws low pressure vapour from the evaporator, compresses it to high pressure, and discharges it to the condenser, which is the whole reason the cabin gets cold. Replacing the compressor restores system pressure, but the receiver drier and the expansion valve have to be renewed at the same time or the new unit will not last.

The fitment we have confirmed runs 2008 to 2015, and it is the single reference listed in the table, so check the chassis code before you order.

The housing is die cast aluminium and the shaft seal is a double lip design rated for the pressures the system runs at, with the pulley and clutch fitted and tested. Internal clearances are set on the line, which is why the unit does not have to be shimmed on fitting.

No cold air with the clutch not engaging is often the clutch coil or the low pressure switch, so check both before condemning the compressor. A compressor that runs continuously and never cycles can be an overcharge or a failed control valve, not necessarily the compressor itself. A squeal on engagement that goes away once the clutch is fully in points at the belt or the clutch air gap.

Flush the system and replace the receiver drier and the expansion valve whenever a compressor is replaced, or the debris will destroy the new unit. Evacuate the system for at least 45 minutes before charging, and leak test at the ports after charging. Check the clutch air gap and the belt alignment after fitting, and confirm the pressures at idle and at 2000 rpm. Send your original number if it is not listed and we will check the pulley diameter and the port layout.

Any doubt about 92610JM01C fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.