Home > All Products > Lighting & Electrical > Harnesses > 038971782B, 38971782B Car Glow Plug Rail Bridge Wiring Harness for VW 1.9 TDI
038971782B, 38971782B Car Glow Plug Rail Bridge Wiring Harness for VW 1.9 TDI
038971782B, 38971782B Car Glow Plug Rail Bridge Wiring Harness for VW 1.9 TDI - image 1
038971782B, 38971782B Car Glow Plug Rail Bridge Wiring Harness for VW 1.9 TDI - image 2
038971782B, 38971782B Car Glow Plug Rail Bridge Wiring Harness for VW 1.9 TDI - image 3
038971782B, 38971782B Car Glow Plug Rail Bridge Wiring Harness for VW 1.9 TDI - image 4
038971782B, 38971782B Car Glow Plug Rail Bridge Wiring Harness for VW 1.9 TDI - image 5

038971782B, 38971782B Car Glow Plug Rail Bridge Wiring Harness for VW 1.9 TDI

≥ 50 pieces $7.15
Wholesale price Quotation within 24h · FOB / CIF
MOQ 50 pcs · OE 038971782B · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 038971782B. Confirm your model and year before ordering.

Make
Model
Year
Engine
VW
BORA I (1J2) 1.9 TDI
1998.10-2005.05
VW
BORA Variant (1J6) 1.9 TDI
1999.05-2005.05
VW
CADDY II Box Body/MPV (9K9A) 1.9 SDI
1995.11-2004.01
VW
CADDY II MPV (9K9B) 1.7 SDI
1995.11-2004.01
VW
CADDY III Box Body/MPV (2KA/ 2KH/ 2CA/ 2CH) 2.0 SDI
2004.03-2015.05
VW
CADDY III MPV (2KB/ 2KJ/ 2CB/ 2CJ) 2.0 SDI
2004.03-2015.05
VW
CALIFORNIA T5 Camper (7EC/ 7EF/ 7EG/ 7HF/ 7HC) 1.9 TDI
2007.05-2009.11
VW
EOS (1F7/ 1F8) 2.0 TDI
2006.06-2008.05
VW
FOX Hatchback (5Z1/ 5Z3/ 5Z4) 1.4 TDI
2005.04-2009.12
VW
GOLF III (1H1) 1.9 TDI
1993.08-1997.12
VW
GOLF III Cabriolet (1E7) 1.9 TDI
1995.08-1998.05
VW
GOLF III Variant (1H5) 1.9 TDI
1994.03-1999.04
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryHarnesses
MOQ50 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
038971782B38971782B
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

The number 038971782B identifies this glow plug wiring harness, which fits VW BORA I, BORA Variant and CADDY II Box Body/MPV as set out in the fitment table.

The assembly is built as a drop-in replacement for the original module: same flange outline, same outlet spigot diameter, same connector keying and the same float arm travel. On this design the pump and the sender are supplied as one unit, which is how the vehicle maker sells the part and the only way to renew both without cutting into the tank wiring.

The fitment we have confirmed runs from 1993.08 to 2015.05, split across 12 references in the table, so check the chassis code against the list before you order.

The impeller is machined rather than sintered and the armature is balanced, so the unit runs quietly and does not set up the low frequency drone a worn pump is known for. The level sender uses a thick film resistor track with a stainless float arm, the combination that keeps the gauge steady once the tank drops below a quarter.

If the gauge reads empty with half a tank left, the sender track has worn through, and on this design the sender only comes with the pump. Intermittent stalling in traffic together with a gauge that jumps is often a single fault, because the sender and the pump share the flange and its earth return. A pump on its way out usually shows up first as a lean code at high load and a hesitation above 4000 rpm, long before it stops altogether.

Never run the pump dry to test it. Prime by switching the ignition on for two seconds three times before cranking. Clean the top of the tank before opening it so no grit drops into the reservoir while the module is out. Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. If the vehicle has a saddle tank with two openings, confirm which side the module sits on; the two sides are not interchangeable.

Any doubt about 038971782B fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.