Home > All Products > Belts & Hoses > Hoses > 12262-22130 High Quality Ventilation Hose for Toyota
12262-22130 High Quality Ventilation Hose for Toyota
12262-22130 High Quality Ventilation Hose for Toyota - image 1
12262-22130 High Quality Ventilation Hose for Toyota - image 2
12262-22130 High Quality Ventilation Hose for Toyota - image 3
12262-22130 High Quality Ventilation Hose for Toyota - image 4
12262-22130 High Quality Ventilation Hose for Toyota - image 5
12262-22130 High Quality Ventilation Hose for Toyota - image 6

12262-22130 High Quality Ventilation Hose for Toyota

≥ 100 pieces $1.43
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 12262-22130 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryHoses
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
12262-22130
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

12262-22130 is the reference this ventilation hose is built to. The compatibility table carries the numbers we have confirmed so far.

The hose has to stay sealed under slight vacuum, so the wall is reinforced against collapsing rather than against pressure like a coolant hose. On many engines the ventilation hose also carries a small calibrated restrictor or a PCV valve, and the hose is shaped around that part rather than being a plain length of tube.

A textile reinforcement sits in the wall so the hose resists collapsing under crankcase vacuum while still flexing with the engine. The ends are moulded to the spigot diameter and the clamps sit behind the formed bead, so the hose cannot be drawn off by vacuum or by movement.

Whistling or a hiss from the valve cover area at idle often comes from a hose that has split along the moulded bellows. A split or a hard, cracked hose lets unmetered air in and usually shows up first as a rough idle or a lean fuel trim code. Oil weeping at the hose ends is an early sign, because the clamp has lost its grip on a hose that has gone hard with heat.

Check the spigots for old rubber and hardened residue and clean them back to a smooth surface before fitting the new hose. After the first run, recheck the clamps and look for oil mist around the ends, since a hose settles onto the spigot once it is hot. Do not substitute a straight length of hose for a moulded one, because a straight hose will kink at the bend and close the breather off. Keep the hose away from exhaust and EGR pipework when routing a replacement, because radiant heat is what hardens these hoses in service.

The reference 12262-22130 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.