Home > All Products > Engine Valves & Components > 13202-6N200 Engine Intake Exhaust Valve for Nissan X-Trail Primera 2.0 QR20DE
13202-6N200 Engine Intake Exhaust Valve for Nissan X-Trail Primera 2.0 QR20DE
13202-6N200 Engine Intake Exhaust Valve for Nissan X-Trail Primera 2.0 QR20DE - image 1
13202-6N200 Engine Intake Exhaust Valve for Nissan X-Trail Primera 2.0 QR20DE - image 2
13202-6N200 Engine Intake Exhaust Valve for Nissan X-Trail Primera 2.0 QR20DE - image 3
13202-6N200 Engine Intake Exhaust Valve for Nissan X-Trail Primera 2.0 QR20DE - image 4
13202-6N200 Engine Intake Exhaust Valve for Nissan X-Trail Primera 2.0 QR20DE - image 5
13202-6N200 Engine Intake Exhaust Valve for Nissan X-Trail Primera 2.0 QR20DE - image 6

13202-6N200 Engine Intake Exhaust Valve for Nissan X-Trail Primera 2.0 QR20DE

≥ 100 pieces $1.27
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 13202-6N200 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 13202-6N200. Confirm your model and year before ordering.

Make
Model
Year
Engine
NISSAN
PRIMERA ESTATE (WP12) 2.0
2002.03
NISSAN
PRIMERA HATCHBACK (P12) 2.0
2002.07-2008.10
NISSAN
X-TRAIL I (T30) 2.0/2.0 4x4/2.5 4x4
2001.06-2013.01
NISSAN
PRIMERA (P12) 2.0
2002.03-2008.10
NISSAN
X-TRAIL II (T31) 2.5/2.5 4x4
2007.06-2014.07
NISSAN
ALTIMA (L33) 2.5
2012.05
NISSAN
ROGUE 2.5/2.5 AWD
2007.01-2013.12
NISSAN
X-TRAIL III (T32_/ T32R/ T32RR) 2.5 (T32)/2.5 ALL MODE 4x4-i/2.5 ALL MODE 4x4-i (NT32)
2013.10
NISSAN
ALTIMA (L32) 2.5
2006.10-2013.07
NISSAN
ALTIMA (L31) 2.5
2001.08-2006.12
NISSAN
AVENIR (W11) 2.0/2.0 4x4
2001.09-2005.12
NISSAN
NV350 / CARAVAN BUS E26 2.5 KS2E26/ KS4E26/ CS4E26/ D
2012.05
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryEngine Valves & Components
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
13202-6N200132026N200
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

13202-6N200 is the reference this electric fuel pump assembly is built to, and it is the number a workshop will look up for NISSAN PRIMERA ESTATE, PRIMERA HATCHBACK and X-TRAIL I.

An in-tank electric fuel pump assembly like this one lifts petrol out of the tank and pushes it to the rail at a steady pressure, so the engine sees the same supply at idle, on a cold start and under full load. Inside the housing a small DC motor turns a roller or turbine impeller, and on most applications the same housing also carries the pressure regulator and the level sender.

The fitment we have confirmed runs from 2001.06 to 2014.07, split across 12 references in the table, so check the chassis code against the list before you order.

Every unit is pressure tested and flow tested before packing; the sheet covers delivery volume at 3 bar, current draw at 12 V and leak down once the pump is switched off. The strainer is a multi layer mesh rated around 60 microns that still passes enough volume at low tank levels, and the outlet flange is supplied with a new sealing ring.

A whine or buzz from under the rear seat that gets louder as the tank empties points at the pump motor rather than the relay or the fuse. Intermittent stalling in traffic together with a gauge that jumps is often a single fault, because the sender and the pump share the flange and its earth return. A fuel smell around the tank with no visible leak is often the flange seal, and a distorted seal is usually a pump that was fitted without a new ring.

Compare the new float arm with the old one before fitting. If the arm has to be bent to clear the tank, the gauge will read wrong. Never run the pump dry to test it. Prime by switching the ignition on for two seconds three times before cranking. Drain the tank below a quarter, release the pressure at the service port and disconnect the battery before the lock ring comes off. Cross reference numbers are listed with the item. If yours is not among them, send it over and we will check the flange outline and the connector against the drawing before you order.

Any doubt about 13202-6N200 fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.