Home > All Products > VVT Variable Valve Timing Oil Control Solenoid > 15340-31010 VVT Variable Valve Timing Solenoid for Toyota 4Runner 4.0L 2003-2009 for Toyota FJ Cruiser 2007-2009
15340-31010 VVT Variable Valve Timing Solenoid for Toyota 4Runner 4.0L 2003-2009 for Toyota FJ Cruiser 2007-2009
15340-31010 VVT Variable Valve Timing Solenoid for Toyota 4Runner 4.0L 2003-2009 for Toyota FJ Cruiser 2007-2009 - image 1

15340-31010 VVT Variable Valve Timing Solenoid for Toyota 4Runner 4.0L 2003-2009 for Toyota FJ Cruiser 2007-2009

≥ 30 pieces $7.64
Wholesale price Quotation within 24h · FOB / CIF
MOQ 30 pcs · OE 15340-31010 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 15340-31010. Confirm your model and year before ordering.

Make
Model
Year
Engine
LEXUS
GX (URJ15_/ GRJ15_) 400 4WD (GRJ158)
2012.05
TOYOTA
4 RUNNER IV (_N21_) 4.0 EFI 4WD (GRN215)
2002.11-2009.12
TOYOTA
4 RUNNER V (_N28_) 4.0 4WD (GRN285_)
2009.08-2016.12
TOYOTA
FJ CRUISER (GSJ1_) 4.0 4WD (GSJ15_/ GSJ15R)
2005.06-2018.01
TOYOTA
LAND CRUISER (_J7_/ _JL7_) 4.0 4x4 (GRJ79/ GRJ76/ GRJ71)
2007.03
TOYOTA
LAND CRUISER 200 (_J2_) 4.0 (GRJ200_/ GRJ200R)
2010.01
TOYOTA
LAND CRUISER PRADO (_J12_) 4.0 (GRJ120/ GRJ125/ GRJ121)
2002.09-2010.12
TOYOTA
LAND CRUISER PRADO (_J15_) 4.0 V6 VVT-i (GRJ150_/ GRJ125_/ GRJ150)
2009.08
TOYOTA
LAND CRUISER Pick-up (_J7_/ _JL7_) 4.0 4x4 (GRJ79)
2007.03
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryVVT Variable Valve Timing Oil Control Solenoid
MOQ30 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
15340-31010
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

The number 15340-31010 identifies this electric fuel pump assembly, which fits LEXUS GX, TOYOTA 4 RUNNER IV and 4 RUNNER V as set out in the fitment table.

An in-tank electric fuel pump assembly like this one lifts petrol out of the tank and pushes it to the rail at a steady pressure, so the engine sees the same supply at idle, on a cold start and under full load. This is a complete in-tank module rather than a bare cartridge: pump, plastic reservoir, level sender and outlet flange arrive already assembled, so the tank only has to come down once.

The fitment we have confirmed runs from 2002.09 to 2018.01, split across 9 references in the table, so check the chassis code against the list before you order.

The level sender uses a thick film resistor track with a stainless float arm, the combination that keeps the gauge steady once the tank drops below a quarter. Terminals are tin plated and the connector body is keyed to the original pin layout, so the factory plug clicks straight in without an adapter harness.

Long cranking before the engine fires, worst after the car has stood overnight, is the classic sign of a check valve or a pump that is losing rest pressure. A whine or buzz from under the rear seat that gets louder as the tank empties points at the pump motor rather than the relay or the fuse. Intermittent stalling in traffic together with a gauge that jumps is often a single fault, because the sender and the pump share the flange and its earth return.

Change the fuel filter at the same time; a restricted filter makes a new pump work against excess pressure and shortens its life. Clean the top of the tank before opening it so no grit drops into the reservoir while the module is out. Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. Overseas customers usually take these in multiples of 20; the carton is sized so that 20 modules fill one layer without crushing.

Order 15340-31010 by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.