Home > All Products > Suspension Rubber Parts > 52686S5A004 Rubber, Rear Spring Mounting for Honda
52686S5A004 Rubber, Rear Spring Mounting for Honda
52686S5A004 Rubber, Rear Spring Mounting for Honda - image 1
52686S5A004 Rubber, Rear Spring Mounting for Honda - image 2
52686S5A004 Rubber, Rear Spring Mounting for Honda - image 3
52686S5A004 Rubber, Rear Spring Mounting for Honda - image 4
52686S5A004 Rubber, Rear Spring Mounting for Honda - image 5
52686S5A004 Rubber, Rear Spring Mounting for Honda - image 6

52686S5A004 Rubber, Rear Spring Mounting for Honda

≥ 100 pieces $0.72
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 52686S5A004 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 52686S5A004. Confirm your model and year before ordering.

Make
Model
Year
Engine
HONDA
CR-V II (RD_) 2.0/2.0 (RD4)/2.0 (RD5)
2001.09-2007.07
HONDA
CIVIC VII HATCHBACK (EU/ EP/ EV) 1.4 i (EP1/ EU7)/1.4 iS (EP1/ EU5/ EU7)/1.5
2000.01-2006.02
HONDA
CIVIC VII SALOON (ES/ ET) 1.2 i-DSI (ES6)/1.3 IMA (ED9/ ES9)/1.4 (ES4)
2000.10-2006.04
HONDA
CR-V III (RE_) 2.0 i-VTEC (RE5/ RE1)/2.0 i-VTEC 4WD (RE5/ RE2)/2.2 i-CTDi 4WD (RE6)
2006.06-2020.12
HONDA
CR-V IV (RM_) 1.6 i-DTEC (RE6)/1.6 i-DTEC 4WD (RE6)/2.0 (RM1)
2012.01-2018.12
HONDA
FR-V (BE) 1.7 (BE1)/1.7 Vtec 4x4 (BE2)/1.8 (BE1)
2004.08-2011.12
HONDA
INTEGRA COUPE (DC5) 2.0 (DC5)/2.0 16V Type-R (DC5)/2.0 Type-S
2002.02-2007.04
HONDA
STREAM (RN) 1.7 16V (RN1)/1.8 Vtec (RN6)/1.8 Vtec AWD (RN7)
2001.05-2014.05
HONDA
CIVIC VI AERODECK (MB/ MC) 1.4 16V (MB8)/1.5 16V (MB9)/1.6 16V (MC1)
1998.04-2001.02
HONDA
CIVIC VI FASTBACK (MA/ MB) 1.4 i (MA8/ MB2)/1.5 16V (MB3)/1.6 (MB4)
1995.06-2001.02
HONDA
CIVIC VI HATCHBACK (EJ/ EK) 1.4 LPG/1.4 i (EJ9)/1.4 i S (EJ9)
1995.10-2001.03
HONDA
CIVIC VI SALOON (EJ/ EK/ SO) 1.4 i (EJ9)/1.5 i (EK3)/1.6 VTi (EK4/ SO4)
1995.11-2001.03
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategorySuspension Rubber Parts
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
52686S5A00452686-S5A-004
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

The number 52686S5A004 identifies this electric fuel pump assembly, which fits HONDA CR-V II, CIVIC VII HATCHBACK and CIVIC VII SALOON as set out in the fitment table.

The unit lives inside the fuel tank and is cooled by the fuel around it, which is the reason a pump that is habitually run on an almost empty tank is usually the first one to fail. Fuel delivery is the whole job of this part. It primes within a second or two of the key being turned, holds rest pressure after shutdown and keeps the supply steady when the tank is low.

The fitment we have confirmed runs from 1995.06 to 2020.12, split across 12 references in the table, so check the chassis code against the list before you order.

The impeller is machined rather than sintered and the armature is balanced, so the unit runs quietly and does not set up the low frequency drone a worn pump is known for. Every unit is pressure tested and flow tested before packing; the sheet covers delivery volume at 3 bar, current draw at 12 V and leak down once the pump is switched off.

A whine or buzz from under the rear seat that gets louder as the tank empties points at the pump motor rather than the relay or the fuse. A fuel smell around the tank with no visible leak is often the flange seal, and a distorted seal is usually a pump that was fitted without a new ring. A sudden no-start with good spark and a dry rail almost always comes back to the pump or its supply, and the pump is the cheaper of the two to rule out.

Change the fuel filter at the same time; a restricted filter makes a new pump work against excess pressure and shortens its life. Never run the pump dry to test it. Prime by switching the ignition on for two seconds three times before cranking. Clean the top of the tank before opening it so no grit drops into the reservoir while the module is out. Each module is packed in a foam lined box with the seal, the lock ring where the application uses one, and a pigtail on versions that need it.

Order 52686S5A004 by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.