Home > All Products > Brakes > ABS Sensors > 89546-26150 New Wheel Speed Sensor ABS Sensor for Toyota Hiace
89546-26150 New Wheel Speed Sensor ABS Sensor for Toyota Hiace
89546-26150 New Wheel Speed Sensor ABS Sensor for Toyota Hiace - image 1
89546-26150 New Wheel Speed Sensor ABS Sensor for Toyota Hiace - image 2
89546-26150 New Wheel Speed Sensor ABS Sensor for Toyota Hiace - image 3
89546-26150 New Wheel Speed Sensor ABS Sensor for Toyota Hiace - image 4
89546-26150 New Wheel Speed Sensor ABS Sensor for Toyota Hiace - image 5

89546-26150 New Wheel Speed Sensor ABS Sensor for Toyota Hiace

≥ 20 pieces $5.11
Wholesale price Quotation within 24h · FOB / CIF
MOQ 20 pcs · OE 89546-26150 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryABS Sensors
MOQ20 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
89546-26150
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Our electric fuel pump assembly for 89546-26150 is made to the original drawing and tested before it is boxed.

The assembly is built as a drop-in replacement for the original module: same flange outline, same outlet spigot diameter, same connector keying and the same float arm travel. On this design the pump and the sender are supplied as one unit, which is how the vehicle maker sells the part and the only way to renew both without cutting into the tank wiring.

A check valve in the outlet holds rest pressure after the key is turned off, so a hot restart does not need a long crank before the engine catches. Every unit is pressure tested and flow tested before packing; the sheet covers delivery volume at 3 bar, current draw at 12 V and leak down once the pump is switched off.

A fuel smell around the tank with no visible leak is often the flange seal, and a distorted seal is usually a pump that was fitted without a new ring. A pump on its way out usually shows up first as a lean code at high load and a hesitation above 4000 rpm, long before it stops altogether. A sudden no-start with good spark and a dry rail almost always comes back to the pump or its supply, and the pump is the cheaper of the two to rule out.

Compare the new float arm with the old one before fitting. If the arm has to be bent to clear the tank, the gauge will read wrong. Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. Torque the lock ring to the figure in the workshop manual and recheck for seepage after the first ten minutes of running. Overseas customers usually take these in multiples of 20; the carton is sized so that 20 modules fill one layer without crushing.

The reference 89546-26150 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.