Home > All Products > Engine Cooling > Water Pump > Auxiliary Electric Water Pump 06H121601P for AUDI A4 Allroad B9 A5 A6 Allroad C7
Auxiliary Electric Water Pump 06H121601P for AUDI A4 Allroad B9 A5 A6 Allroad C7
Auxiliary Electric Water Pump 06H121601P for AUDI A4 Allroad B9 A5 A6 Allroad C7 - image 1

Auxiliary Electric Water Pump 06H121601P for AUDI A4 Allroad B9 A5 A6 Allroad C7

AUDI auxiliary electric water pump · replaces OE 06H121601P and 15 more numbers · 15 cross references · 12-month warranty
Wholesale price Quotation within 24h · FOB / CIF
OE 06H121601P · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 06H121601P. Confirm your model and year before ordering.

Make
Model
Year
Engine
AUDI
A4 Allroad B9 (8WH/ 8WJ) 2.0 TDI quattro
2016.01-2019.10
AUDI
A4 B6 (8E2) 3.0
2000.11-2004.12
AUDI
A4 B6 Avant (8E5) 3.0
2001.04-2004.12
AUDI
A4 B6 Convertible (8H7) 3.0
2002.04-2005.12
AUDI
A4 B7 (8EC) 3.0
2004.11-2006.07
AUDI
A4 B7 Avant (8ED) 3.0 quattro
2004.11-2006.07
AUDI
A4 B9 (8W2/ 8WC) 2.0 TDI
2015.05-2019.11
AUDI
A4 B9 Avant (8W5/ 8WD) 2.0 TDI
2015.08-2020.09
AUDI
A5 (F53/ F5P) 2.0 TFSI quattro
2016.06-2020.08
AUDI
A5 Convertible (F57/ F5E) 2.0 TFSI quattro
2016.11-2020.12
AUDI
A5 Sportback (F5A/ F5F) 2.0 TFSI
2016.08-2020.02
AUDI
A6 Allroad C7 (4GH/ 4GJ) 3.0 TDI quattro
2012.01-2018.09
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialAluminium alloy
BrandFobautoparts
CategoryWater Pump
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
Supply typeAftermarket replacement
OE / reference numbers
06H121601P13760VV202373900615.5329A2
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

If you are searching 06H121601P, this engine water pump is the assembly that carries that number for AUDI A4 Allroad B9, A4 B6 and A4 B6 Avant.

Coolant leaves the pump outlet, travels through the block and head, and returns through the radiator; a pump with a worn impeller moves less of it and the temperature gauge starts climbing under load. On this design the impeller sits inside a cast housing that bolts to the block, and the shaft runs on a sealed bearing with a mechanical face seal between the bearing and the coolant side.

The fitment we have confirmed runs from 2000.11 to 2020.12, split across 12 references in the table, so check the chassis code against the list before you order.

The mechanical seal is a carbon or silicon carbide face pair running against a ceramic seat, which is the part that has to survive both hot and cold starts without weeping. The impeller is a moulded or stamped part balanced before assembly, because an unbalanced impeller at engine speed loads the bearing and shortens seal life.

Coolant loss with no visible external leak can come from a seal that only weeps when the system is hot and under pressure. A worn bearing shows up as a rumble or a whine that changes with engine speed, and rocking the fan or the pulley by hand will usually reveal play. On engines where the pump is driven by the timing belt, a seized pump bearing can take the belt with it, so a noisy pump should not be left in service.

Drain the cooling system before the pump comes off, and flush the block afterwards if the old coolant came out dirty or full of sediment. Refill with the correct coolant specification and bleed the system properly, since an air pocket will look exactly like a failed pump on the temperature gauge. Fit a new gasket or O-ring rather than reusing the old one, and do not use sealant on a face that was designed to seal dry unless the manual calls for it. Keep the old pump until the new one has run a few hundred kilometres, so a weep in the first week can be traced to the seal rather than to the gasket face.

Order 06H121601P by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.