Home > All Products > Brake Cylinders > Brake Wheel Cylinder 4402.E7 for Citroen Berlingo / Xsara (M49/N1) 1998-2011 1.6HDi
Brake Wheel Cylinder 4402.E7 for Citroen Berlingo / Xsara (M49/N1) 1998-2011 1.6HDi
Brake Wheel Cylinder 4402.E7 for Citroen Berlingo / Xsara (M49/N1) 1998-2011 1.6HDi - image 1
Brake Wheel Cylinder 4402.E7 for Citroen Berlingo / Xsara (M49/N1) 1998-2011 1.6HDi - image 2

Brake Wheel Cylinder 4402.E7 for Citroen Berlingo / Xsara (M49/N1) 1998-2011 1.6HDi

≥ 50 pieces $3.02
Wholesale price Quotation within 24h · FOB / CIF
MOQ 50 pcs · OE 4402.E7 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 4402.E7. Confirm your model and year before ordering.

Make
Model
Year
Engine
CITROEN
Berlingo / Xsara (M49/N1) 1.6HDi
1998.01-2011.12
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryBrake Cylinders
MOQ50 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
4402.E74402
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

The number 4402.E7 identifies this brake master cylinder, which fits CITROEN Berlingo / Xsara as set out in the fitment table.

Replacing the shoes restores the braking effort on the rear axle and, on cars with a load sensing valve, restores the correct front to rear balance. This is a rear axle set: two shoes for one drum, which is what a single wheel requires, and most cars need two sets for the axle.

The fitment we have confirmed runs 1998.01 to 2011.12, and it is the single reference listed in the table, so check the chassis code before you order.

The set is packed as a matched pair, because fitting one new shoe against a worn one will pull the car to one side. Friction coefficient is held within a narrow band across the batch, so both sides of the axle brake the same.

A rear brake that grabs or locks early is often a lining contaminated with oil from a leaking wheel cylinder. A squeal that stops when the brake is applied hard is usually glazed lining rather than a worn shoe. If the handbrake travel has grown steadily, the shoes or the adjuster are worn; check both before replacing only the shoes.

Replace the shoes as an axle set, and renew the return springs and the hold down clips at the same time. Do not mix lining compounds between the two sides of the axle. Clean and inspect the wheel cylinders for seepage before fitting new shoes; oil will ruin the new lining. The set is packed as a matched pair with the lining protected against chipping in transit.

The reference 4402.E7 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.