Home > All Products > Brake Cylinders > Brake Wheel Cylinder 47550-87401 for Daihatsu Terios / Toyota Cami 1997-2006 1.3
Brake Wheel Cylinder 47550-87401 for Daihatsu Terios / Toyota Cami 1997-2006 1.3
Brake Wheel Cylinder 47550-87401 for Daihatsu Terios / Toyota Cami 1997-2006 1.3 - image 1

Brake Wheel Cylinder 47550-87401 for Daihatsu Terios / Toyota Cami 1997-2006 1.3

≥ 50 pieces $4.29
Wholesale price Quotation within 24h · FOB / CIF
MOQ 50 pcs · OE 47550-87401 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 47550-87401. Confirm your model and year before ordering.

Make
Model
Year
Engine
DAIHATSU
TERIOS (J1_) 1.3 VVT-i Turbo 4WD
1997.05-2006.10
DAIHATSU
TERIOS (J2_/ F7__) 1.3 VVT-i 4x4
2005.11
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryBrake Cylinders
MOQ50 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
47550-87401
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

The number 47550-87401 identifies this brake master cylinder, which fits DAIHATSU TERIOS and TERIOS as set out in the fitment table.

On a drum brake the wheel cylinder pushes the shoes apart, the lining rubs on the drum, and the return springs pull the shoes back off when the pedal is released. This is a rear axle set: two shoes for one drum, which is what a single wheel requires, and most cars need two sets for the axle.

The fitment we have confirmed runs from 1997.05 to 2006.10, split across 2 references in the table, so check the chassis code against the list before you order.

Each shoe is checked for arc conformity against a gauge before packing, because a shoe that does not follow the drum radius will only touch at the centre. The steel shoe is coated against corrosion and the lining edges are chamfered to reduce the chance of a squeal on first application.

A scraping or grinding noise from the rear when braking, worse when the car is loaded, is lining worn down to the rivets. A squeal that stops when the brake is applied hard is usually glazed lining rather than a worn shoe. If the handbrake travel has grown steadily, the shoes or the adjuster are worn; check both before replacing only the shoes.

Set the adjuster so the drum just clears the shoes, then bed the brakes in gently for the first 200 kilometres. Clean and inspect the wheel cylinders for seepage before fitting new shoes; oil will ruin the new lining. Replace the shoes as an axle set, and renew the return springs and the hold down clips at the same time. The set is packed as a matched pair with the lining protected against chipping in transit.

We ship 47550-87401 from stock in multiples of 20, and mixed pallets are possible if you need several references at once.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.