Product details
About this part
Fog lamp and cargo lamp switch 15143597 fits the 2003 to 2007 Chevrolet Silverado and GMC Sierra, the 2003 to 2006 Chevrolet Tahoe, Suburban and Avalanche, the GMC Yukon and Yukon XL and the Cadillac Escalade, Escalade ESV and Escalade EXT, and it is the two button switch pod that sits in the dash panel to the left of the steering column on these trucks.
The pod is a black ABS moulding that clips into the dash bezel, with two independent rockers. The left rocker switches the fog lamps and the right one switches the cargo lamp in the load bed, and both are lit from behind so they can be found at night. Inside the housing each rocker has its own contact bridge that slides over silver plated fixed contacts, and the moving parts sit behind a rubber membrane that keeps dust and spilled coffee out of the electrics. The fog side is wired through the park lamp circuit, so the fog lamps can only come on with the lights already on, and the cargo side is a latching circuit fed from the battery so the lamp stays lit with the ignition off. A single multi way connector at the back of the pod carries the feed, the ground, the two load outputs and the back lighting.
How they fail. The fog lamps stop working while the headlights are fine, or the switch only works when it is pushed at an angle because the contact bridge has worn a step in the plastic track. A cargo lamp that stays on after the switch is released flattens the battery overnight, and that fault is easy to blame on the lamp itself until the switch is unplugged and the drain stops. Water getting past the windscreen seal or a leaking heater core lands on the dash and corrodes the connector pins, which gives an intermittent flicker over bumps. A switch that has been hot smells of burnt plastic and the rocker feels soft or does not click.
Fitting notes. Disconnect the negative battery terminal first, because the cargo circuit is live with the key out. Prise the dash bezel away from the switch pod with a plastic trim tool, not a screwdriver, and release the two retaining tabs on the sides of the pod. Push the locking tab on the connector before pulling it, since these latches break easily on a cold dash. Fit the new pod, reconnect, and test both rockers with the park lamps on before the bezel is pressed back, then check that the cargo lamp goes out with the switch in the rest position.
Supplied as one switch pod with both rockers and the connector latch intact, individually bagged. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.