Home > All Products > Belts & Hoses > Hoses > Clutch Hydraulic Hose F3TZ7A512A for Ford F-250 F-350
Clutch Hydraulic Hose F3TZ7A512A for Ford F-250 F-350
Clutch Hydraulic Hose F3TZ7A512A for Ford F-250 F-350 - image 1
Clutch Hydraulic Hose F3TZ7A512A for Ford F-250 F-350 - image 2
Clutch Hydraulic Hose F3TZ7A512A for Ford F-250 F-350 - image 3
Clutch Hydraulic Hose F3TZ7A512A for Ford F-250 F-350 - image 4
Clutch Hydraulic Hose F3TZ7A512A for Ford F-250 F-350 - image 5
Clutch Hydraulic Hose F3TZ7A512A for Ford F-250 F-350 - image 6

Clutch Hydraulic Hose F3TZ7A512A for Ford F-250 F-350

≥ 30 pieces $10.22
Wholesale price Quotation within 24h · FOB / CIF
OE F3TZ-7A512A F3TZ-7A512-A 628-201 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE F3TZ-7A512A F3TZ-7A512-A 628-201. Confirm your model and year before ordering.

Make
Model
Year
Engine
Ford
Bronco 4.9 5.0 5.8 Manual Trans
1992-1996
Ford
F-150 4.9 5.0 5.8 Manual Trans
1992-1996
Ford
F-250 4.9 5.0 5.8 Manual Trans
1993-1996
Ford
F-350 4.9 5.8 Manual Trans
1993-1997
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryHoses
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
Supply typeAftermarket replacement
OE / reference numbers
F3TZ-7A512A F3TZ-7A512-A 628-201628201F3TZ7A512A
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Hydraulic clutch line F3TZ-7A512A, also sold as F3TZ-7A512-A and Dorman 628-201, for the Ford Bronco 1992-1996, F-150 1992-1996, F-250 1993-1996 and F-350 1993-1997 with the manual gearbox.

This is the pipe that carries the hydraulic fluid from the clutch master cylinder on the firewall down to the release cylinder on the bell housing. On these trucks the original part is a formed steel line with a flex section, and they rust through above the frame rail or chafe where they pass the bell housing, which is why the replacement is a preformed nylon line. The line is 40 inches long, made from PA12 nylon with an outside diameter of about 0.37 inch, and it ends in a male quick disconnect fitting at both ends, so it clips into the master and the release cylinder without any bleeding adapter. It is pre-bent to follow the original route and comes with the retaining clips.

Fitment detail worth quoting to the customer. These lines do not fit trucks built with the T-18 four speed transmission, because that gearbox uses a different release mechanism and a different line. The listing covers the M5R2, S5-42 and S5-47 five speed manuals and the ZF and E4OD era trucks as originally equipped. Engines covered are the 4.9 litre straight six and the 5.0 and 5.8 litre V8s in the F-250, and the 4.9 and 5.8 in the F-350.

How these fail. The common complaint is a clutch pedal that goes soft or sinks to the floor and has to be pumped, with fluid loss that leaves a wet patch on the bell housing or the frame rail. A line that has been rubbing will show a shiny flat spot before it bursts, and a line that has been allowed to run dry will pull air in at the quick connect O-ring. Because the clutch and the brake share the same reservoir on some of these trucks, a falling level is sometimes noticed at the brake pedal first.

Fitting notes. Suck the reservoir down rather than draining it, press the white collar on each quick connect and pull the line free, and catch the fluid in a tray because it will run out of the master. Route the new line exactly as the old one ran, using the original clips, and keep it away from the exhaust and from the sharp edge on the bell housing. Connect the master end first, then the release cylinder, then bleed at the release cylinder with a helper on the pedal: open the bleeder, push the pedal slowly to the floor, close the bleeder, release the pedal, and repeat until no bubbles come out and the pedal is firm. Top up with the specified fluid and check for leaks after a short drive.

Supplied as one preformed line with fittings and clips fitted. Twelve month warranty.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.