Home > All Products > Engines & Transmissions > Clutch Master Cylinders > Clutch Master Cylinder 31420-26200 for Toyota Hiace (KDH200/KDH203/TRH213) 2005-2018 2.5L 2KD-FTV
Clutch Master Cylinder 31420-26200 for Toyota Hiace (KDH200/KDH203/TRH213) 2005-2018 2.5L 2KD-FTV
Clutch Master Cylinder 31420-26200 for Toyota Hiace (KDH200/KDH203/TRH213) 2005-2018 2.5L 2KD-FTV - image 1
Clutch Master Cylinder 31420-26200 for Toyota Hiace (KDH200/KDH203/TRH213) 2005-2018 2.5L 2KD-FTV - image 2

Clutch Master Cylinder 31420-26200 for Toyota Hiace (KDH200/KDH203/TRH213) 2005-2018 2.5L 2KD-FTV

≥ 100 pieces $5.52
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 31420-26200(ALU) · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 31420-26200(ALU). Confirm your model and year before ordering.

Make
Model
Year
Engine
TOYOTA
HIACE / COMMUTER V Bus (TRH2__/ KDH2__/ LH2__/ GDH2__) 2.5 D-4D 4WD (KDH205/ KDH227/ KDH225)
2004.08-2014.06
TOYOTA
HIACE IV Bus (__H1_/ __H2_) 2.5 D-4D (KLH12/ KLH22)
2001.08-2012.12
TOYOTA
HIACE IV Van (__H1_/ __H2_) 2.5 D-4D 4WD (KLH28/ KLH18)
2001.08-2012.12
TOYOTA
HIACE V Bus 2.5 D-4D (KDH200)
2019.05
TOYOTA
HIACE V Van (TRH2__/ KDH2__/ LH2__/ GDH2__) 2.5 D-4D (KDH20_/ KDH21_/ KDH22_/ KDH200/ KDH220)
2004.06
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryClutch Master Cylinders
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
31420-26200(ALU)31420-26200
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

The number 31420-26200(ALU) identifies this clutch master cylinder, which fits TOYOTA HIACE / COMMUTER V Bus, HIACE IV Bus and HIACE IV Van as set out in the fitment table.

When the pedal is pressed the piston closes the compensating port and pushes fluid down the line, which moves the release cylinder and disengages the clutch. The bore is smaller than a brake master cylinder because the pressure needed is lower and the pedal ratio does the rest of the work.

The fitment we have confirmed runs from 2001.08 to 2014.06, split across 5 references in the table, so check the chassis code against the list before you order.

The bore is honed and checked for roundness, because an oval bore lets the seal bypass and the pedal loses its bite as the clutch warms up. Each unit is bench tested for pressure hold before packing, because a seal that only weeps under load will not show up in a static check.

A clutch pedal that sinks slowly to the floor while held down is an internal seal bypass, and it usually starts on hot days or in traffic. A pedal that needs pumping to select a gear means the release cylinder is not getting full travel, which can be air or a bypassing master. Fluid on the pedal box carpet or running down the firewall is a failed rear seal, and it will strip paint as well as ruin the carpet.

Check the pedal free play and the pushrod length after fitting, since a rod that is too long will hold the port closed and the clutch will slip. Use fresh fluid and do not mix it with fluid from an open container, because moisture in the system attacks the seals from the inside. Inspect the flexible line and the release cylinder while the system is open, since a new master pushing into a worn release cylinder often finds the next leak. Keep the reservoir cap and the diaphragm in good condition, because a poor seal lets moisture in and the fluid absorbs it.

The reference 31420-26200(ALU) is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.