Product details
About this part
Coolant outlet flange 21517-1HK3A is the water outlet that bolts to the cylinder head on the Nissan HR16DE 1.6 petrol engine in the Versa C11 and N17, the Micra K13, the March, the Note E11, the Tiida C11, the Sentra B17, the Cube Z12, the Juke F15, the NV200 and the Pulsar C13, from 2004 to 2022.
This is the plastic housing that closes the coolant gallery at the end of the cylinder head and holds the thermostat. It has a machined face with a rubber O ring seal against the head, an upper neck that takes the radiator top hose, two smaller spigots for the heater matrix and the throttle body coolant circuit, and a threaded boss for the engine coolant temperature sensor. The body is a glass filled polyamide moulding with metal reinforced bolt holes, and the thermostat sits inside it on a rubber seat with the jiggle valve at the top so air can bleed past when the system is filled.
How they fail. The most common failure is a coolant leak from the joint with the cylinder head, which shows as a white or pink crust around the flange and a slow loss of coolant with no puddle under the car. The plastic goes brittle with heat cycles and cracks at the hose neck, and a crack there can let go completely on a hot day and empty the system in a few minutes. A sticking thermostat inside a housing that is otherwise sound gives the opposite problem: the engine runs cold, the heater blows lukewarm and the temperature gauge never reaches the middle. A leaking O ring that has flattened with age gives a seep that only appears when the system is cold and under vacuum as it cools.
Fitting notes. Do this with the engine completely cold. Drain the coolant from the radiator tap into a clean container, then unclip the top hose, the two small hoses and the temperature sensor connector. Undo the mounting bolts in a cross pattern and lift the housing away, taking care not to drop the old O ring into the head. Clean the head face with a plastic scraper, not a metal one, and check it for pitting. Fit the new O ring dry, or with a trace of coolant, never with gasket sealant, seat the thermostat with the jiggle valve at the top, and tighten the bolts evenly to 10 Nm. Refill slowly with the heater on hot, run the engine with the cap off until the fan cycles, then top up and check for leaks after a full cool down.
Supplied as one outlet housing with thermostat, O ring and sensor port plug. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.