Home > All Products > Engine Cooling > Water Pump > Engine Water Pump 270918C91 for International DT466E
Engine Water Pump 270918C91 for International DT466E
Engine Water Pump 270918C91 for International DT466E - image 1

Engine Water Pump 270918C91 for International DT466E

Truck water pump for International DT466E - coolant pump with gasket, replaces OE 270918C91 - MOQ 100 pcs
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 270918C91 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryWater Pump
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
270918C91
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

270918C91 is the reference this engine water pump is built to. The compatibility table carries the numbers we have confirmed so far.

On this design the impeller sits inside a cast housing that bolts to the block, and the shaft runs on a sealed bearing with a mechanical face seal between the bearing and the coolant side. An engine water pump is what keeps coolant moving through the block, the head and the radiator, and once the bearing or the seal goes the whole cooling circuit stops working the way it was designed to.

Gasket faces are checked for flatness before packing, because a pump that does not seal against the block will leak at the joint no matter how good the internal seal is. The housing is cast and then machined on the gasket face and the bearing bore, so the pump sits flat against the block and the shaft runs true.

A squealing belt that comes back after a new belt is fitted often traces to a pump pulley that is no longer running true. Overheating that appears at idle or in traffic but clears once the car is moving points at flow, and a slipping or eroded impeller is one of the causes. Coolant loss with no visible external leak can come from a seal that only weeps when the system is hot and under pressure.

Fit a new gasket or O-ring rather than reusing the old one, and do not use sealant on a face that was designed to seal dry unless the manual calls for it. Torque the mounting bolts in the sequence and to the figure the manual gives, working up in stages so the housing does not distort. Turn the pump by hand before fitting the belt, and check that the pulley runs true once the belt is tensioned. Mixing coolant types shortens seal life, so use one specification throughout and do not top up with plain water for long periods.

Any doubt about 270918C91 fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.