Home > All Products > Engine Cooling > Water Pump > Engine Water Pump 4376357 4309344 5528405 for Cummins 6C8.3/ISC/QSC
Engine Water Pump 4376357 4309344 5528405 for Cummins 6C8.3/ISC/QSC
Engine Water Pump 4376357 4309344 5528405 for Cummins 6C8.3/ISC/QSC - image 1

Engine Water Pump 4376357 4309344 5528405 for Cummins 6C8.3/ISC/QSC

Engine water pump for Cummins 6C8.3/ISC/QSC - coolant pump with gasket, replaces OE 4376357 - MOQ 100 pcs
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 4376357 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryWater Pump
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
43763574309344552840553462045291444CU3462044376357451.500
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

4376357 is the number to quote for this engine water pump. Fitment is listed in the compatibility table, and we will confirm your application on request.

This is a complete pump assembly, meaning housing, impeller, shaft, bearing and seal arrive together, so the job is a straight replacement rather than a rebuild. On this design the impeller sits inside a cast housing that bolts to the block, and the shaft runs on a sealed bearing with a mechanical face seal between the bearing and the coolant side.

The bearing is a sealed double row unit packed for life, with a drain hole between the seal and the bearing so a weeping seal shows up as a drip instead of washing the grease out. The housing is cast and then machined on the gasket face and the bearing bore, so the pump sits flat against the block and the shaft runs true.

Overheating that appears at idle or in traffic but clears once the car is moving points at flow, and a slipping or eroded impeller is one of the causes. A worn bearing shows up as a rumble or a whine that changes with engine speed, and rocking the fan or the pulley by hand will usually reveal play. The usual first sign is a coolant weep from the drain hole under the pump snout, often leaving a crusty stain on the block or a sweet smell after a hot shutdown.

Turn the pump by hand before fitting the belt, and check that the pulley runs true once the belt is tensioned. Torque the mounting bolts in the sequence and to the figure the manual gives, working up in stages so the housing does not distort. Refill with the correct coolant specification and bleed the system properly, since an air pocket will look exactly like a failed pump on the temperature gauge. Keep the old pump until the new one has run a few hundred kilometres, so a weep in the first week can be traced to the seal rather than to the gasket face.

Any doubt about 4376357 fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.