Home > All Products > Engine Cooling > Water Pump > Engine Water Pump 685155C92 685155C94 685155C95 for Cummins DT466
Engine Water Pump 685155C92 685155C94 685155C95 for Cummins DT466
Engine Water Pump 685155C92 685155C94 685155C95 for Cummins DT466 - image 1

Engine Water Pump 685155C92 685155C94 685155C95 for Cummins DT466

Engine water pump for Cummins DT466 - coolant pump with gasket, replaces OE 685155C92 - MOQ 100 pcs
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 685155C92 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryWater Pump
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
685155C92685155C94685155C95AWP1190685.155.C92WP1190DP1381
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

685155C92 is the number to quote for this engine water pump. Fitment is listed in the compatibility table, and we will confirm your application on request.

The pump is driven off the accessory belt or the timing belt depending on the engine, and it circulates coolant whenever the engine turns, so its condition sets the flow rate the radiator and heater core actually see. On this design the impeller sits inside a cast housing that bolts to the block, and the shaft runs on a sealed bearing with a mechanical face seal between the bearing and the coolant side.

The impeller is a moulded or stamped part balanced before assembly, because an unbalanced impeller at engine speed loads the bearing and shortens seal life. The pulley flange is machined to the original offset, so the belt runs in the same plane as the other pulleys and does not walk off the edge.

The usual first sign is a coolant weep from the drain hole under the pump snout, often leaving a crusty stain on the block or a sweet smell after a hot shutdown. A worn bearing shows up as a rumble or a whine that changes with engine speed, and rocking the fan or the pulley by hand will usually reveal play. A squealing belt that comes back after a new belt is fitted often traces to a pump pulley that is no longer running true.

Torque the mounting bolts in the sequence and to the figure the manual gives, working up in stages so the housing does not distort. Drain the cooling system before the pump comes off, and flush the block afterwards if the old coolant came out dirty or full of sediment. Turn the pump by hand before fitting the belt, and check that the pulley runs true once the belt is tensioned. It is worth replacing the thermostat and the belt at the same time on engines where the pump is belt driven, since the labour overlaps almost completely.

We ship 685155C92 from stock in multiples of 20, and mixed pallets are possible if you need several references at once.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.