Product details
About this part
Exhaust pipe flange gasket 17451-0C010, also sold as 17451-20020, 17451-0A010 and 17451-0D090, seals the joint between the manifold down pipe and the front exhaust pipe on Toyota Avensis, Auris, Corolla, RAV4 and Verso from 2001, and on the Lexus RX and NX and the Subaru Forester and Legacy.
The part is a flat ring gasket with an inner diameter of 60 mm, an outer diameter of 77 mm and a thickness of 15 mm, so it is a thick sealing ring rather than a thin paper gasket. The core is a steel insert and the two faces carry a graphite based facing that is compressed when the joint is pulled up. Graphite is used here because it survives the 700 to 900 degree C gas temperature at the down pipe joint without burning away, and because it does not bond to either flange, so the joint can be opened again after years of heat cycling. The 15 mm thickness is the working allowance: the ring crushes by roughly a millimetre as the joint is torqued and that crush is what takes up the small misalignment between two cast iron or stainless flanges that have been heated and cooled thousands of times.
Symptoms of a failed ring are easy to read. There is a hard ticking or puffing noise from the joint on a cold start that fades as the metal expands, a line of black soot around the flange, and on modern cars a P0420 or P0430 catalyst efficiency code because air is being drawn in upstream of the oxygen sensor. A ring that has been blowing for a while also erodes the flange face, so the new gasket will not seal on a pitted surface until it is dressed flat.
Fitting notes. Soak the two flange nuts in penetrating oil the day before, because the studs on the down pipe are usually rusted. Support the front pipe so the joint does not hang on the studs, wire brush both flange faces, and slide the new ring in dry without any exhaust paste. Paste on a graphite ring stops it seating and bakes into a hard crust that cracks later. Pull the nuts evenly, alternating side to side, to around 30 to 40 Nm, then run the engine to full temperature and re check the torque once the joint has cooled. If the flanges are badly worn, fit a new front pipe rather than doubling two gaskets, because a double stack has no crush left to take up movement.
Supplied as one gasket, individually bagged. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.