Home > All Products > Brakes > Brake System > Front Disc Brake Pad Set A742K for Toyota Corolla 2011-2013 1.6L/1.8L
Front Disc Brake Pad Set A742K for Toyota Corolla 2011-2013 1.6L/1.8L
Front Disc Brake Pad Set A742K for Toyota Corolla 2011-2013 1.6L/1.8L - image 1

Front Disc Brake Pad Set A742K for Toyota Corolla 2011-2013 1.6L/1.8L

≥ 100 pieces $3.17
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE A742K · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE A742K. Confirm your model and year before ordering.

Make
Model
Year
Engine
TOYOTA
Corolla
2011.01-2013.12
1.6L/1.8L
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryBrake System
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
A742K
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Part number A742K: a disc brake pad set assembly that replaces the original unit on TOYOTA Corolla with no drilling and no adapter.

The set carries the pads for one caliper, which means both wheels of an axle need two sets, and it is supplied with the backing plates and any shims the caliper uses. A disc brake pad set is the friction pair that clamps the rotor and turns wheel speed into heat, so it is the part that decides how the car actually pulls up.

The fitment we have confirmed runs 2011.01 to 2013.12, and it is the single reference listed in the table, so check the chassis code before you order.

The backing plate is stamped to the original outline and thickness, because a plate that is too thin will flex and a plate that is too thick will not clear the caliper bracket. A shim or an anti squeal layer sits between the plate and the piston on the applications that use one, and it is fitted rather than left loose in the box.

A grinding that continues after the car stops moving is the backing plate touching the rotor, which means the friction material is gone. Pads that squeal only at low speed and light pedal are usually glazed; if the friction thickness is still in spec, bedding them in again may be enough. Heavy black dust on one wheel only, with the others clean, suggests that caliper is dragging rather than that the pad is wearing normally.

Replace pads as an axle set and check the rotor thickness against the minimum marked on the hub before fitting new pads to a worn disc. Check the brake fluid level after the job, since pushing the pistons back raises it and an overfilled reservoir will spill onto paint. Clean the caliper bracket and lubricate the slide pins with the correct high temperature grease, because a dry slide pin is what makes one pad wear faster than its pair. Brake fluid absorbs moisture with age, so a fluid change every two years keeps the calipers and the ABS unit working as designed.

Order A742K by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.