Product details
About this part
Full gasket set DRM61210S, also sold as 68078540AA, 68078540AB, 68078540AC, K68078540AB, 68078554AD and K68078604AA, for the Chrysler Pentastar 3.6 litre V6 in the Chrysler 300C, Dodge Charger and Challenger from 2011, Jeep Grand Cherokee WK2 and Wrangler JK, and Ram 1500 from 2012.
This is the complete engine overhaul gasket package rather than just the head pair. The bag holds two multi layer steel head gaskets, the upper and lower intake manifold gaskets, the exhaust manifold gaskets, both valve cover gaskets with their spark plug tube seals, the front timing cover gasket and its seals, the oil pan gasket, the rear main seal and housing gasket, the water pump and thermostat housing gaskets, the oil cooler and filter housing seals, and the small O-rings for the dipstick tube and the cam phaser covers. Buying the set means the whole job is covered by one part number, which matters on this engine because the timing cover and the oil cooler sit behind the same front end and are almost never resealed separately once the engine is out.
The head gaskets themselves are three layer steel with a folded stopper ring around each combustion chamber and a black elastomer coating on both faces. The coating is what seals the fine machining marks on the block and head, so the surfaces have to be clean and flat, not scraped shiny, and no additional sealant is used on the gasket faces. The Pentastar block is aluminium with cast iron liners and the head bolts are torque to yield, so the bolts are single use and the final angle has to be pulled in the sequence given in the manual.
Where these sets go. The 3.6 Pentastar is used across the LX platform cars, the WD Durango, the JK Wrangler, the DS Ram 1500 and the vans built on the same front end, including the Fiat Freemont, Lancia Thema and Voyager and the VW Routan. Note the Ram 1500 Classic built after 2018 is a continuation of the same DS truck and uses the same engine, so the set still fits even though the model name changed.
What usually brings a Pentastar in for this job. Coolant loss with no external leak and a sweet smell at the tailpipe, a milky film under the oil filler cap, or combustion gas in the coolant that pushes the hoses hard within minutes of a cold start. A leaking oil cooler housing on the top of the engine is a separate and very common failure on this engine, and it is worth renewing its seals whenever the top end is apart.
Fitting notes. Work with the engine cold, drain the coolant and the oil, and label the connectors as they come off because the coil and injector plugs are easy to swap. Clean the deck surfaces with a plastic scraper and a fine abrasive pad, check them with a straight edge, and blow out the head bolt holes so no oil is trapped under the bolts. Oil the threads and the washer faces of the new bolts, fit the gaskets dry, and follow the staged torque and angle sequence exactly. Replace the coolant with the specified OAT type and bleed the system with the heater on full before the first road test.
Packed as a complete set in one box with the seals bagged by position. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.