Home > All Products > Hardware & Fasteners > Body & Trim > Fender Liner 86812-A9000 for 2015-2020 KIA SEDONA
Fender Liner 86812-A9000 for 2015-2020 KIA SEDONA
Fender Liner 86812-A9000 for 2015-2020 KIA SEDONA - image 1
Fender Liner 86812-A9000 for 2015-2020 KIA SEDONA - image 2

Fender Liner 86812-A9000 for 2015-2020 KIA SEDONA

≥ 50 pieces $5.31
Wholesale price Quotation within 24h · FOB / CIF
MOQ 50 pcs · OE 86812-A9000 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 86812-A9000. Confirm your model and year before ordering.

Make
Model
Year
Engine
KIA
SEDONA
2015.01-2020.12
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryBody & Trim
MOQ50 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
86812-A9000
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Part number 86812-A9000: a electric fuel pump assembly assembly that replaces the original unit on KIA SEDONA with no drilling and no adapter.

On this design the pump and the sender are supplied as one unit, which is how the vehicle maker sells the part and the only way to renew both without cutting into the tank wiring. The unit lives inside the fuel tank and is cooled by the fuel around it, which is the reason a pump that is habitually run on an almost empty tank is usually the first one to fail.

The fitment we have confirmed runs 2015.01 to 2020.12, and it is the single reference listed in the table, so check the chassis code before you order.

The strainer is a multi layer mesh rated around 60 microns that still passes enough volume at low tank levels, and the outlet flange is supplied with a new sealing ring. Every unit is pressure tested and flow tested before packing; the sheet covers delivery volume at 3 bar, current draw at 12 V and leak down once the pump is switched off.

Intermittent stalling in traffic together with a gauge that jumps is often a single fault, because the sender and the pump share the flange and its earth return. A pump on its way out usually shows up first as a lean code at high load and a hesitation above 4000 rpm, long before it stops altogether. Rough running below a quarter tank that clears after a fill up is the reservoir or the strainer failing to pick up fuel, not a dirty injector.

Change the fuel filter at the same time; a restricted filter makes a new pump work against excess pressure and shortens its life. Compare the new float arm with the old one before fitting. If the arm has to be bent to clear the tank, the gauge will read wrong. Drain the tank below a quarter, release the pressure at the service port and disconnect the battery before the lock ring comes off. Each module is packed in a foam lined box with the seal, the lock ring where the application uses one, and a pigtail on versions that need it.

Any doubt about 86812-A9000 fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.