Home > All Products > Fuel Pumps & Tanks > Fuel Pump Assembly > Fuel Pump Assembly 31110-BU110 for Hyundai Elantra 2021
Fuel Pump Assembly 31110-BU110 for Hyundai Elantra 2021
Fuel Pump Assembly 31110-BU110 for Hyundai Elantra 2021 - image 1
Fuel Pump Assembly 31110-BU110 for Hyundai Elantra 2021 - image 2
Fuel Pump Assembly 31110-BU110 for Hyundai Elantra 2021 - image 3
Fuel Pump Assembly 31110-BU110 for Hyundai Elantra 2021 - image 4
Fuel Pump Assembly 31110-BU110 for Hyundai Elantra 2021 - image 5

Fuel Pump Assembly 31110-BU110 for Hyundai Elantra 2021

≥ 20 pieces $62.34
Wholesale price Quotation within 24h · FOB / CIF
MOQ 20 pcs · OE 31110-BU110 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 31110-BU110. Confirm your model and year before ordering.

Make
Model
Year
Engine
HYUNDAI
Elantra
2021.01
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryFuel Pump Assembly
MOQ20 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
31110-BU110
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

The number 31110-BU110 identifies this fuel pump assembly, which fits HYUNDAI Elantra as set out in the fitment table.

This is a complete fuel pump assembly with the level sender built into the flange, which is how the vehicle maker supplies the part and the only way to renew the pump and the gauge together. The assembly sits in the tank and delivers fuel at constant pressure while the sender on the same flange reports how much is left, so one part number covers both jobs.

The fitment we have confirmed runs from 2021.01, and it is the single reference listed in the table, so check the chassis code before you order.

The flange is moulded from fuel-resistant POM, the reservoir from PA66, and the sender track is a thick film resistor that will not wear through in the first hundred thousand kilometres. The outlet carries a non return valve to hold rest pressure and the flange is supplied with a new O ring and, where the application needs it, a new lock ring.

Fuel smell around the tank area with no drip is nearly always the flange seal rather than the tank itself. Long cranking after standing, followed by normal running once started, is rest pressure bleeding away past the check valve. A drop in power at high load with a lean code, before any hard failure, is the usual early warning from a tired pump cartridge.

Prime the system by cycling the ignition three times for two seconds before the first crank. Recheck for leaks at the flange after ten minutes of running, and again after the first tank of fuel. Always fit the new flange seal supplied with the assembly; do not reuse the old one. Send your original number if it is not in the cross reference list and we will check the flange and the connector for you.

The reference 31110-BU110 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.