Home > All Products > Hardware & Fasteners > Lift Supports > Hood Gas Strut 65470-1AA0A for Nissan Murano (Z51) 2009-2014 3.5L VQ35DE
Hood Gas Strut 65470-1AA0A for Nissan Murano (Z51) 2009-2014 3.5L VQ35DE
Hood Gas Strut 65470-1AA0A for Nissan Murano (Z51) 2009-2014 3.5L VQ35DE - image 1
Hood Gas Strut 65470-1AA0A for Nissan Murano (Z51) 2009-2014 3.5L VQ35DE - image 2
Hood Gas Strut 65470-1AA0A for Nissan Murano (Z51) 2009-2014 3.5L VQ35DE - image 3

Hood Gas Strut 65470-1AA0A for Nissan Murano (Z51) 2009-2014 3.5L VQ35DE

≥ 100 pieces $2.35
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 65470-1AA0A · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 65470-1AA0A. Confirm your model and year before ordering.

Make
Model
Year
Engine
NISSAN
MURANO II (Z51) 3.5 4x4
2007.11-2014.09
NISSAN
MURANO II VAN (Z51) 3.5 CVTC 4x4
2013.03-2014.09
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryLift Supports
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
65470-1AA0A
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

This listing is for one electric fuel pump assembly with reference 65470-1AA0A, covering NISSAN MURANO II and MURANO II VAN.

Because the cartridge, the strainer and the sender share one flange, replacing the whole assembly retires three wear items at once instead of chasing them one by one. An in-tank electric fuel pump assembly like this one lifts petrol out of the tank and pushes it to the rail at a steady pressure, so the engine sees the same supply at idle, on a cold start and under full load.

The fitment we have confirmed runs from 2007.11 to 2014.09, split across 2 references in the table, so check the chassis code against the list before you order.

The level sender uses a thick film resistor track with a stainless float arm, the combination that keeps the gauge steady once the tank drops below a quarter. Every unit is pressure tested and flow tested before packing; the sheet covers delivery volume at 3 bar, current draw at 12 V and leak down once the pump is switched off.

A pump on its way out usually shows up first as a lean code at high load and a hesitation above 4000 rpm, long before it stops altogether. A sudden no-start with good spark and a dry rail almost always comes back to the pump or its supply, and the pump is the cheaper of the two to rule out. Rough running below a quarter tank that clears after a fill up is the reservoir or the strainer failing to pick up fuel, not a dirty injector.

Compare the new float arm with the old one before fitting. If the arm has to be bent to clear the tank, the gauge will read wrong. Never run the pump dry to test it. Prime by switching the ignition on for two seconds three times before cranking. Drain the tank below a quarter, release the pressure at the service port and disconnect the battery before the lock ring comes off. Each module is packed in a foam lined box with the seal, the lock ring where the application uses one, and a pigtail on versions that need it.

The reference 65470-1AA0A is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.