Product details
About this part
Ignition coil 12654078, cross referenced as UF680, is the coil on plug module for the GM Ecotec 2.0 turbo LTG and 2.5 litre engines in the Chevrolet Camaro, Malibu, Impala, Equinox, Traverse, Blazer and Colorado, the Cadillac ATS, CTS and CT6, the Buick Regal, Envision and LaCrosse, the GMC Canyon, Terrain and Acadia, the Opel and Vauxhall Insignia and the Saab 9-5, from 2008 to 2024.
The design differs from a plain pencil coil in one important way: the ignition control module is a separate block bolted to the top of the coil, and it is that block, not the coil winding, that the four pin connector plugs into. The module holds the switching transistor and the current limiting circuit, so the engine control unit sends a low voltage trigger and the coil does the rest. Splitting the two parts means the coil can be built shorter to fit under the deep cam cover of the direct injection head, and it also means a fault can sit in either half. The boot is long and ribbed, with a spring contact at the plug end, and the whole assembly is held by a single bolt through a bracket on the cam cover.
How they fail. The classic pattern on the LTG engine is a single cylinder misfire after oil has leaked from the cam cover gasket into the plug well, which softens the boot and lets the spark track to the head. The car then shudders at light throttle around 60 km/h, the traction light may flicker, and the code reader shows P0301 for cylinder one far more often than the others because that well fills first on a transverse installation. A module that has failed internally gives a dead cylinder with no spark at all and no oil in the well. Rough running that moves from cylinder to cylinder when the coils are swapped points to the module, while a fault that stays with the cylinder points to the coil or the plug.
Fitting notes. Remove the engine cover and the intake duct if it crosses the cam cover. Release the connector by pushing its grey latch, undo the single bolt and pull the coil up with a slight twist. Before fitting anything new, dry the plug well and find out why it is wet: a split cam cover gasket will destroy the replacement within a few thousand kilometres. Check the plug gap and the plug torque while the coil is out. Fit the new coil with dielectric grease in the boot, tighten the bolt to about 10 Nm, and clear the codes before a road test. On the four cylinder engines it is worth replacing all four at once once one has failed.
Supplied as one complete coil with module and boot, individually boxed. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.