Product details
About this part
Subaru 22433-AA41A is the coil that sits on top of each cylinder head of the EJ20 and EJ25 boxer engines, and it is one of the most widely cross referenced coils in the aftermarket, sold as UF240, C1229 and E581C among others. It fits the Forester from 2002 to 2008, the Impreza from 2000 to 2007, the Legacy and Outback of the same period, and the Tribeca 3.0, always four coils to an engine.
Because the engine is a flat four, the coils are not in a line on top of a cam cover. Two sit on each side, low down beside the intake runners on the left and under the washer bottle and air box area on the right, which is why the rear right coil on a Forester is the one that gets neglected. The coil itself is a compact pencil unit with a two pin connector in some markets and a three pin in others, a short boot and a metal bracket that bolts to the head. The A suffix and the B suffix differ only in the boot material, and the AA570 is the later service replacement, so any of them will work in the same hole.
The classic Subaru failure is a misfire on a cold damp morning that clears once the engine warms, and it is nearly always a cracked boot on one of the two hidden coils. Water runs off the bonnet and pools around the coil, the boot cracks at the base and the spark tracks down the outside to the head. The ECU sets P0301 to P0304, and because the boxer engine has a distinctive sound anyway, a single cylinder misfire can be hard to hear until it is bad. A coil that has failed internally gives a dead miss and a strong fuel smell, and on a turbo EJ the misfire can put the engine into limp mode at high load.
Access is the job. Remove the battery and the washer bottle on the right side, and the air box and intake pipe on the left, then unplug the coil, undo the bracket bolt and pull it off the plug. Check the plug well for water and leaves and clear the drain, because a blocked drain is what kills the coil in the first place. Fit new plugs if they are due, apply dielectric grease to the boot, and press the coil down squarely so the boot does not fold. Torque the bracket bolt to 8 Nm and refit everything before starting the engine.
Supplied as one coil with boot. Four are needed per vehicle. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.