Product details
About this part
22433-53J20 is the Nissan pencil coil sold as UF38, and it is the one that fits a long list of nineties Nissans: the Sunny N14, Primera P10 and P11, Almera N15, 100NX, Maxima J30, Terrano II and the Infiniti G20. It sits directly on the plug, one per cylinder, held by a single bolt through a tag on the body, with a short two pin connector at the top.
The design is simple by modern standards. There is no igniter inside the coil, so the power stage lives in the ECU or in a separate module and the coil only has a primary feed and a trigger return. The body is a slim cylinder with a mounting flange, the boot is about 60 mm long with a single sealing rib, and the secondary winding is wound on a segmented former with a resistance of around 10 kohm. The simplicity is why these coils last a long time but also why they give very little warning when they fail.
The usual failure on a Sunny or Primera is a misfire that starts as a slight hesitation at 2000 rpm and becomes a steady dead miss with a P030x code. The plug well on the SR20 and GA16 engines fills with oil from a perished spark plug tube seal, the boot softens, and the spark tracks down the outside of the plug. On the Terrano II the coil is exposed to dust and water and the connector corrodes, which gives an intermittent miss over bumps. A coil that tests fine on a meter can still break down when hot, so the swap test is more reliable than a resistance check.
Pull the connector, undo the bolt and ease the coil out by the body, not by the connector. If the well is full of oil, soak it out and replace the tube seals before fitting the new coil, or the same failure will repeat. Check the plug for a widened gap and for a brown stain on the insulator, which is a sign of tracking. Smear dielectric grease inside the new boot, press the coil down until it seats, torque the bolt to 8 Nm and reconnect. Clear the codes and confirm with a road test that includes a long climb under load.
Supplied as one coil with boot. Four are needed per vehicle. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.