Home > All Products > Bearings & Seals > Hub Assemblies > MD00126111D Wheel Hub, Steering Knuckle OEM MD001-26-111D for kia
MD00126111D Wheel Hub, Steering Knuckle OEM MD001-26-111D for kia
MD00126111D Wheel Hub, Steering Knuckle OEM MD001-26-111D for kia - image 1

MD00126111D Wheel Hub, Steering Knuckle OEM MD001-26-111D for kia

≥ 50 pieces $4.91
Wholesale price Quotation within 24h · FOB / CIF
MOQ 50 pcs · OE MD00126111D · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE MD00126111D. Confirm your model and year before ordering.

Make
Model
Year
Engine
KIA
PRIDE (DA) 1.3 i 1.1 i
1990.01-2001.09
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryHub Assemblies
MOQ50 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
MD00126111DMD001-26-111D
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

If you are searching MD00126111D, this electric fuel pump assembly is the assembly that carries that number for KIA PRIDE.

This is a complete in-tank module rather than a bare cartridge: pump, plastic reservoir, level sender and outlet flange arrive already assembled, so the tank only has to come down once. Fuel delivery is the whole job of this part. It primes within a second or two of the key being turned, holds rest pressure after shutdown and keeps the supply steady when the tank is low.

The fitment we have confirmed runs 1990.01 to 2001.09, and it is the single reference listed in the table, so check the chassis code before you order.

A venturi jet inside the reservoir keeps the pump flooded during cornering and on steep gradients, which is what stops the engine starving on a long sweeping bend. The impeller is machined rather than sintered and the armature is balanced, so the unit runs quietly and does not set up the low frequency drone a worn pump is known for.

A whine or buzz from under the rear seat that gets louder as the tank empties points at the pump motor rather than the relay or the fuse. If the gauge reads empty with half a tank left, the sender track has worn through, and on this design the sender only comes with the pump. Rough running below a quarter tank that clears after a fill up is the reservoir or the strainer failing to pick up fuel, not a dirty injector.

Clean the top of the tank before opening it so no grit drops into the reservoir while the module is out. Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. Compare the new float arm with the old one before fitting. If the arm has to be bent to clear the tank, the gauge will read wrong. We keep stock of the fast moving references and can ship mixed pallets, so a workshop order does not have to be one part number only.

Order MD00126111D by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.