Home > All Products > Engine Cooling > Radiator Hose > Radiator Hose No.1 Upper 16571-15160 for Toyota Corolla (AE100/AE110) 1993-1997 1.6L/1.8L
Radiator Hose No.1 Upper 16571-15160 for Toyota Corolla (AE100/AE110) 1993-1997 1.6L/1.8L
Radiator Hose No.1 Upper 16571-15160 for Toyota Corolla (AE100/AE110) 1993-1997 1.6L/1.8L - image 1

Radiator Hose No.1 Upper 16571-15160 for Toyota Corolla (AE100/AE110) 1993-1997 1.6L/1.8L

≥ 300 pieces $1.33
Wholesale price Quotation within 24h · FOB / CIF
MOQ 300 pcs · OE 16571-15160 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 16571-15160. Confirm your model and year before ordering.

Make
Model
Year
Engine
TOYOTA
CARIBE Estate 1.6
1994.09-2003.08
TOYOTA
CONQUEST Hatchback (E90) 1.6 (AE90)
1988.10-2001.10
TOYOTA
COROLLA (_E10_) 1.6 (AE101_/ AE101R)
1991.06-1997.12
TOYOTA
COROLLA (_E11_) 1.6 Aut. (AE111_/ AE111R)
1995.05-2002.06
TOYOTA
COROLLA (_E9_) 1.6 i (AE92)
1987.05-1994.04
TOYOTA
COROLLA Compact (_E10_) 1.8 EFi (AE102)
1992.07-1999.12
TOYOTA
COROLLA Compact (_E11_) 1.6 (AE111_)
1997.05-2000.02
TOYOTA
COROLLA Compact (_E9_) 1.6 i (AE92)
1989.08-1992.04
TOYOTA
COROLLA Coupe (_E9_) 1.6 (AE92_/ AE92R)
1987.05-1992.04
TOYOTA
COROLLA Estate (_E10_) 1.6 Si (AE101_/ AE101R)
1992.07-1997.04
TOYOTA
COROLLA Estate (_E11_) 1.6 (AE111_/ AE111R)
1997.04-2001.10
TOYOTA
COROLLA LEVIN Coupe (_E10_) 1.6 GT-Z (AE101)
1991.06-1997.08
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryRadiator Hose
MOQ300 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
16571-1516005-1324165711516010-35717-SX228000
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

16571-15160 radiator hose, supplied ready to fit the vehicles in the compatibility table below.

The hose carries the full flow the pump produces, so a hose that has gone soft will collapse under suction on the lower side and starve the pump. A radiator hose carries coolant between the engine and the radiator, and it has to hold pressure and temperature while the engine moves on its mounts, which is why it is moulded to a shape rather than being a straight tube.

The fitment we have confirmed runs from 1987.05 to 2003.08, split across 12 references in the table, so check the chassis code against the list before you order.

The cover is resistant to the oil and ozone that live under a bonnet, since most hose failures start as surface cracks rather than as a burst from inside. The hose is built around a textile braid that takes the pressure, with an EPDM cover and tube that resist coolant and ozone, which is what stops it cracking from the outside in.

A hose that has been contaminated with oil will go soft and eventually split, so an oily hose should be replaced rather than cleaned. A collapsed lower hose will cause overheating at speed, because the pump pulls the wall shut instead of moving coolant. A pinhole leak usually shows as a fine spray or a white crust near a clamp, and it often only appears once the system is hot and pressurised.

Drain the coolant first and let the engine cool completely, since opening a hot system will release scalding coolant. Use the correct type of clamp, and position it behind the bead rather than on it, then tighten until the hose cannot be rotated by hand. Do not use sealant on a moulded hose joint; the seal is the rubber against the stub, and sealant makes the hose slip off under pressure. Carry a spare clamp and a length of hose tape on long trips, because a split hose is one of the few breakdowns that stops the car completely.

The reference 16571-15160 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.