Home > All Products > Engine Cooling > Radiator Hose > Radiator Hose No.2 Lower 16572-31361 for Toyota 4Runner (N280) 2010-2024 4.0L V6
Radiator Hose No.2 Lower 16572-31361 for Toyota 4Runner (N280) 2010-2024 4.0L V6
Radiator Hose No.2 Lower 16572-31361 for Toyota 4Runner (N280) 2010-2024 4.0L V6 - image 1

Radiator Hose No.2 Lower 16572-31361 for Toyota 4Runner (N280) 2010-2024 4.0L V6

≥ 300 pieces $2.45
Wholesale price Quotation within 24h · FOB / CIF
MOQ 300 pcs · OE 16572-31361 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 16572-31361. Confirm your model and year before ordering.

Make
Model
Year
Engine
TOYOTA
4Runner (N280)
2010.01-2024.12
4.0L V6
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryRadiator Hose
MOQ300 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
16572-31361
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

This listing is for one radiator hose with reference 16572-31361, covering TOYOTA 4Runner.

The hose carries the full flow the pump produces, so a hose that has gone soft will collapse under suction on the lower side and starve the pump. On many engines the hose also carries the take-off for the heater circuit or the expansion tank, and those branches are moulded in rather than added with a T piece.

The fitment we have confirmed runs 2010.01 to 2024.12, and it is the single reference listed in the table, so check the chassis code before you order.

The ends are moulded to the stub diameter and often carry a locating mark, so the clamp sits behind the bead and cannot be pushed off under pressure. The wall thickness is held to the original specification, because a thinner wall will balloon under pressure and a thicker one will not seal against the stub.

A collapsed lower hose will cause overheating at speed, because the pump pulls the wall shut instead of moving coolant. A hose that has been contaminated with oil will go soft and eventually split, so an oily hose should be replaced rather than cleaned. Cracks in the outer cover near the ends are where a hose usually fails first, since that is where it flexes most.

Cut or peel the old hose off rather than pulling it, because the stub is often plastic or thin aluminium and will deform under a twisting load. Do not use sealant on a moulded hose joint; the seal is the rubber against the stub, and sealant makes the hose slip off under pressure. Use the correct type of clamp, and position it behind the bead rather than on it, then tighten until the hose cannot be rotated by hand. Replace hoses in pairs on older cars, since the upper and lower usually age at the same rate and the second failure follows the first closely.

Order 16572-31361 by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.