Home > All Products > Bearings & Seals > Wheel Bearings and Seals > RP-1563 Auto Spare Parts Belt Tensioner Pulley Bearing for Gm Ford RP1563
RP-1563 Auto Spare Parts Belt Tensioner Pulley Bearing for Gm Ford RP1563
RP-1563 Auto Spare Parts Belt Tensioner Pulley Bearing for Gm Ford RP1563 - image 1
RP-1563 Auto Spare Parts Belt Tensioner Pulley Bearing for Gm Ford RP1563 - image 2
RP-1563 Auto Spare Parts Belt Tensioner Pulley Bearing for Gm Ford RP1563 - image 3
RP-1563 Auto Spare Parts Belt Tensioner Pulley Bearing for Gm Ford RP1563 - image 4
RP-1563 Auto Spare Parts Belt Tensioner Pulley Bearing for Gm Ford RP1563 - image 5
RP-1563 Auto Spare Parts Belt Tensioner Pulley Bearing for Gm Ford RP1563 - image 6

RP-1563 Auto Spare Parts Belt Tensioner Pulley Bearing for Gm Ford RP1563

≥ 300 pieces $3.33
Wholesale price Quotation within 24h · FOB / CIF
MOQ 300 pcs · OE RP-1563 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryWheel Bearings and Seals
MOQ300 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
RP-1563
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Our electric fuel pump assembly for RP-1563 is made to the original drawing and tested before it is boxed.

Because the cartridge, the strainer and the sender share one flange, replacing the whole assembly retires three wear items at once instead of chasing them one by one. Inside the housing a small DC motor turns a roller or turbine impeller, and on most applications the same housing also carries the pressure regulator and the level sender.

Every unit is pressure tested and flow tested before packing; the sheet covers delivery volume at 3 bar, current draw at 12 V and leak down once the pump is switched off. A check valve in the outlet holds rest pressure after the key is turned off, so a hot restart does not need a long crank before the engine catches.

Rough running below a quarter tank that clears after a fill up is the reservoir or the strainer failing to pick up fuel, not a dirty injector. Intermittent stalling in traffic together with a gauge that jumps is often a single fault, because the sender and the pump share the flange and its earth return. A sudden no-start with good spark and a dry rail almost always comes back to the pump or its supply, and the pump is the cheaper of the two to rule out.

Clean the top of the tank before opening it so no grit drops into the reservoir while the module is out. Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. Never run the pump dry to test it. Prime by switching the ignition on for two seconds three times before cranking. If the vehicle has a saddle tank with two openings, confirm which side the module sits on; the two sides are not interchangeable.

We ship RP-1563 from stock in multiples of 20, and mixed pallets are possible if you need several references at once.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.