Home > All Products > Ignition & Tune-Up > Ignition Coil Boot > Rubber Sleeve for Ignition Coil 58966
Rubber Sleeve for Ignition Coil 58966
Rubber Sleeve for Ignition Coil 58966 - image 1
Rubber Sleeve for Ignition Coil 58966 - image 2
Rubber Sleeve for Ignition Coil 58966 - image 3
Rubber Sleeve for Ignition Coil 58966 - image 4
Rubber Sleeve for Ignition Coil 58966 - image 5

Rubber Sleeve for Ignition Coil 58966

≥ 500 pieces $0.27
Wholesale price Quotation within 24h · FOB / CIF
MOQ 500 pcs · OE 58966 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryIgnition Coil Boot
MOQ500 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
58966
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

This listing is for one electric fuel pump assembly with reference 58966, packed ready to fit.

An in-tank electric fuel pump assembly like this one lifts petrol out of the tank and pushes it to the rail at a steady pressure, so the engine sees the same supply at idle, on a cold start and under full load. On this design the pump and the sender are supplied as one unit, which is how the vehicle maker sells the part and the only way to renew both without cutting into the tank wiring.

A venturi jet inside the reservoir keeps the pump flooded during cornering and on steep gradients, which is what stops the engine starving on a long sweeping bend. The strainer is a multi layer mesh rated around 60 microns that still passes enough volume at low tank levels, and the outlet flange is supplied with a new sealing ring.

A whine or buzz from under the rear seat that gets louder as the tank empties points at the pump motor rather than the relay or the fuse. Intermittent stalling in traffic together with a gauge that jumps is often a single fault, because the sender and the pump share the flange and its earth return. If the gauge reads empty with half a tank left, the sender track has worn through, and on this design the sender only comes with the pump.

Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. Drain the tank below a quarter, release the pressure at the service port and disconnect the battery before the lock ring comes off. Never run the pump dry to test it. Prime by switching the ignition on for two seconds three times before cranking. We keep stock of the fast moving references and can ship mixed pallets, so a workshop order does not have to be one part number only.

Any doubt about 58966 fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.