Home > All Products > Bearings & Seals > Wheel Bearings and Seals > SET20 Auto Spare Parts Timken Set 20 Tapered Roller Bearing
SET20 Auto Spare Parts Timken Set 20 Tapered Roller Bearing
SET20 Auto Spare Parts Timken Set 20 Tapered Roller Bearing - image 1
SET20 Auto Spare Parts Timken Set 20 Tapered Roller Bearing - image 2
SET20 Auto Spare Parts Timken Set 20 Tapered Roller Bearing - image 3
SET20 Auto Spare Parts Timken Set 20 Tapered Roller Bearing - image 4
SET20 Auto Spare Parts Timken Set 20 Tapered Roller Bearing - image 5

SET20 Auto Spare Parts Timken Set 20 Tapered Roller Bearing

≥ 300 pieces $5.33
Wholesale price Quotation within 24h · FOB / CIF
MOQ 300 pcs · OE SET20 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryWheel Bearings and Seals
MOQ300 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
SET20
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Our electric fuel pump assembly for SET20 is made to the original drawing and tested before it is boxed.

Inside the housing a small DC motor turns a roller or turbine impeller, and on most applications the same housing also carries the pressure regulator and the level sender. The assembly is built as a drop-in replacement for the original module: same flange outline, same outlet spigot diameter, same connector keying and the same float arm travel.

The housing is moulded from fuel-resistant POM and PA66 that will not swell or craze after long immersion, and the motor brushes are carbon graphite graded for continuous running in petrol. The level sender uses a thick film resistor track with a stainless float arm, the combination that keeps the gauge steady once the tank drops below a quarter.

Long cranking before the engine fires, worst after the car has stood overnight, is the classic sign of a check valve or a pump that is losing rest pressure. A whine or buzz from under the rear seat that gets louder as the tank empties points at the pump motor rather than the relay or the fuse. A fuel smell around the tank with no visible leak is often the flange seal, and a distorted seal is usually a pump that was fitted without a new ring.

Never run the pump dry to test it. Prime by switching the ignition on for two seconds three times before cranking. Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. Torque the lock ring to the figure in the workshop manual and recheck for seepage after the first ten minutes of running. Overseas customers usually take these in multiples of 20; the carton is sized so that 20 modules fill one layer without crushing.

The reference SET20 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.