Home > All Products > Ignition Switches > Starter Solenoid ZM-710 for Nissan Sunny Pulsar 200SX Subaru Justy (2114-67505) 1.6 12V
Starter Solenoid ZM-710 for Nissan Sunny Pulsar 200SX Subaru Justy (2114-67505) 1.6 12V
Starter Solenoid ZM-710 for Nissan Sunny Pulsar 200SX Subaru Justy (2114-67505) 1.6 12V - image 1
Starter Solenoid ZM-710 for Nissan Sunny Pulsar 200SX Subaru Justy (2114-67505) 1.6 12V - image 2
Starter Solenoid ZM-710 for Nissan Sunny Pulsar 200SX Subaru Justy (2114-67505) 1.6 12V - image 3

Starter Solenoid ZM-710 for Nissan Sunny Pulsar 200SX Subaru Justy (2114-67505) 1.6 12V

≥ 100 pieces $7.77
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE ZM-710 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryIgnition Switches
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
ZM-710
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Our electric fuel pump assembly for ZM-710 is made to the original drawing and tested before it is boxed.

The unit lives inside the fuel tank and is cooled by the fuel around it, which is the reason a pump that is habitually run on an almost empty tank is usually the first one to fail. The assembly is built as a drop-in replacement for the original module: same flange outline, same outlet spigot diameter, same connector keying and the same float arm travel.

The strainer is a multi layer mesh rated around 60 microns that still passes enough volume at low tank levels, and the outlet flange is supplied with a new sealing ring. The level sender uses a thick film resistor track with a stainless float arm, the combination that keeps the gauge steady once the tank drops below a quarter.

A pump on its way out usually shows up first as a lean code at high load and a hesitation above 4000 rpm, long before it stops altogether. Rough running below a quarter tank that clears after a fill up is the reservoir or the strainer failing to pick up fuel, not a dirty injector. A sudden no-start with good spark and a dry rail almost always comes back to the pump or its supply, and the pump is the cheaper of the two to rule out.

Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. Torque the lock ring to the figure in the workshop manual and recheck for seepage after the first ten minutes of running. Compare the new float arm with the old one before fitting. If the arm has to be bent to clear the tank, the gauge will read wrong. We keep stock of the fast moving references and can ship mixed pallets, so a workshop order does not have to be one part number only.

We ship ZM-710 from stock in multiples of 20, and mixed pallets are possible if you need several references at once.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.