Home > All Products > Hardware & Fasteners > Lift Supports > Tailgate Gas Spring 611941 for Volvo 740/760 1981-1992 367mm 380N With Spoiler
Tailgate Gas Spring 611941 for Volvo 740/760 1981-1992 367mm 380N With Spoiler
Tailgate Gas Spring 611941 for Volvo 740/760 1981-1992 367mm 380N With Spoiler - image 1

Tailgate Gas Spring 611941 for Volvo 740/760 1981-1992 367mm 380N With Spoiler

≥ 100 pieces $2.66
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 611941 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 611941. Confirm your model and year before ordering.

Make
Model
Year
Engine
VOLVO
740
1984-1992
VOLVO
740 Estate
1985-1992
VOLVO
760
1981-1990
VOLVO
760 Estate
1981-1990
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryLift Supports
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
611941
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

611941 electric fuel pump assembly, supplied ready to fit the vehicles in the compatibility table below.

This is a complete in-tank module rather than a bare cartridge: pump, plastic reservoir, level sender and outlet flange arrive already assembled, so the tank only has to come down once. Fuel delivery is the whole job of this part. It primes within a second or two of the key being turned, holds rest pressure after shutdown and keeps the supply steady when the tank is low.

The fitment we have confirmed runs from 1981 to 1992, split across 4 references in the table, so check the chassis code against the list before you order.

Terminals are tin plated and the connector body is keyed to the original pin layout, so the factory plug clicks straight in without an adapter harness. Every unit is pressure tested and flow tested before packing; the sheet covers delivery volume at 3 bar, current draw at 12 V and leak down once the pump is switched off.

Long cranking before the engine fires, worst after the car has stood overnight, is the classic sign of a check valve or a pump that is losing rest pressure. Intermittent stalling in traffic together with a gauge that jumps is often a single fault, because the sender and the pump share the flange and its earth return. A pump on its way out usually shows up first as a lean code at high load and a hesitation above 4000 rpm, long before it stops altogether.

Compare the new float arm with the old one before fitting. If the arm has to be bent to clear the tank, the gauge will read wrong. Torque the lock ring to the figure in the workshop manual and recheck for seepage after the first ten minutes of running. Drain the tank below a quarter, release the pressure at the service port and disconnect the battery before the lock ring comes off. Cross reference numbers are listed with the item. If yours is not among them, send it over and we will check the flange outline and the connector against the drawing before you order.

The reference 611941 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.