Home > All Products > Belts & Hoses > Hoses > Ventilation Hose No.1 12261-31030 for Toyota Prado/FJ Cruiser/4Runner (GRJ120/GRJ200/GRN215) 2003-2010 4.0L 1GR-FE
Ventilation Hose No.1 12261-31030 for Toyota Prado/FJ Cruiser/4Runner (GRJ120/GRJ200/GRN215) 2003-2010 4.0L 1GR-FE
Ventilation Hose No.1 12261-31030 for Toyota Prado/FJ Cruiser/4Runner (GRJ120/GRJ200/GRN215) 2003-2010 4.0L 1GR-FE - image 1

Ventilation Hose No.1 12261-31030 for Toyota Prado/FJ Cruiser/4Runner (GRJ120/GRJ200/GRN215) 2003-2010 4.0L 1GR-FE

≥ 300 pieces $1.43
Wholesale price Quotation within 24h · FOB / CIF
MOQ 300 pcs · OE 12261-31030 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 12261-31030. Confirm your model and year before ordering.

Make
Model
Year
Engine
TOYOTA
Prado/FJ Cruiser/4Runner (GRJ120/GRJ200/GRN215)
2003.01-2010.12
4.0L 1GR-FE
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryHoses
MOQ300 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
12261-31030
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

12261-31030 is the number to quote for this ventilation hose, the replacement unit used on TOYOTA Prado/FJ Cruiser/4Runner.

Because the hose runs from a vibrating engine cover to a fixed intake point, it is moulded with a bellows or an offset bend that lets it flex without pulling off either end. The hose has to stay sealed under slight vacuum, so the wall is reinforced against collapsing rather than against pressure like a coolant hose.

The fitment we have confirmed runs 2003.01 to 2010.12, and it is the single reference listed in the table, so check the chassis code before you order.

The bore is smooth and free of flash, since a rough bore gives oil mist somewhere to collect and start blocking the flow. Each hose is checked for bore size and wall thickness before packing, because a hose that is pinched closed at a bend will pressurise the crankcase.

A soft, swollen hose that smells of fuel or oil has been attacked by the vapour it is meant to carry and should be replaced rather than cleaned. A split or a hard, cracked hose lets unmetered air in and usually shows up first as a rough idle or a lean fuel trim code. Whistling or a hiss from the valve cover area at idle often comes from a hose that has split along the moulded bellows.

After the first run, recheck the clamps and look for oil mist around the ends, since a hose settles onto the spigot once it is hot. Seat the hose fully against the bead on both ends before tightening the clamps, and check that the moulded bend is not twisted against its natural routing. Do not substitute a straight length of hose for a moulded one, because a straight hose will kink at the bend and close the breather off. Replace the hose together with the PCV valve on high mileage engines, since a new hose on a stuck valve will pressurise the crankcase again.

The reference 12261-31030 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.