Home > All Products > Engine Cooling > Water Pump > Auxiliary Electric Water Pump 06H965561 for AUDI A4 Allroad B8 A5 A6 Allroad C6
Auxiliary Electric Water Pump 06H965561 for AUDI A4 Allroad B8 A5 A6 Allroad C6
Auxiliary Electric Water Pump 06H965561 for AUDI A4 Allroad B8 A5 A6 Allroad C6 - image 1

Auxiliary Electric Water Pump 06H965561 for AUDI A4 Allroad B8 A5 A6 Allroad C6

AUDI auxiliary electric water pump · replaces OE 06H965561 and 15 more numbers · 15 cross references · 12-month warranty
Wholesale price Quotation within 24h · FOB / CIF
OE 06H965561 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 06H965561. Confirm your model and year before ordering.

Make
Model
Year
Engine
AUDI
A4 Allroad B8 (8KH) 2.0 TFSI quattro
2009.04-2016.05
AUDI
A4 B8 (8K2) 1.8 TFSI
2007.11-2015.12
AUDI
A4 B8 Avant (8K5) 1.8 TFSI
2007.11-2015.12
AUDI
A5 (8T3) 2.0 TFSI
2007.10-2017.01
AUDI
A5 Convertible (8F7) 2.0 TFSI
2009.03-2017.01
AUDI
A5 Sportback (8TA) 2.0 TFSI
2009.09-2017.01
AUDI
Q5 (8RB) 2.0 TFSI quattro
2008.11-2017.05
AUDI
Q5 Van (8RB) 2.0 TFSI quattro
2008.11-2012.09
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialAluminium alloy
BrandFobautoparts
CategoryWater Pump
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
Supply typeAftermarket replacement
OE / reference numbers
06H965561110471132290003117255176340
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Our engine water pump for 06H965561 is made to the original drawing and goes straight on to AUDI A4 Allroad B8, A4 B8 and A4 B8 Avant without modification.

On this design the impeller sits inside a cast housing that bolts to the block, and the shaft runs on a sealed bearing with a mechanical face seal between the bearing and the coolant side. Coolant leaves the pump outlet, travels through the block and head, and returns through the radiator; a pump with a worn impeller moves less of it and the temperature gauge starts climbing under load.

The fitment we have confirmed runs from 2007.10 to 2017.05, split across 8 references in the table, so check the chassis code against the list before you order.

The mechanical seal is a carbon or silicon carbide face pair running against a ceramic seat, which is the part that has to survive both hot and cold starts without weeping. The pulley flange is machined to the original offset, so the belt runs in the same plane as the other pulleys and does not walk off the edge.

On engines where the pump is driven by the timing belt, a seized pump bearing can take the belt with it, so a noisy pump should not be left in service. Overheating that appears at idle or in traffic but clears once the car is moving points at flow, and a slipping or eroded impeller is one of the causes. A worn bearing shows up as a rumble or a whine that changes with engine speed, and rocking the fan or the pulley by hand will usually reveal play.

Drain the cooling system before the pump comes off, and flush the block afterwards if the old coolant came out dirty or full of sediment. Torque the mounting bolts in the sequence and to the figure the manual gives, working up in stages so the housing does not distort. Refill with the correct coolant specification and bleed the system properly, since an air pocket will look exactly like a failed pump on the temperature gauge. Keep the old pump until the new one has run a few hundred kilometres, so a weep in the first week can be traced to the seal rather than to the gasket face.

Order 06H965561 by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.