Home > All Products > Brakes > Brake System > Brake Pad Fitting Kit A-300 for Hyundai Santa Fe/Kia Sorento/Carnival 2006-2018 2.0L-2.9L
Brake Pad Fitting Kit A-300 for Hyundai Santa Fe/Kia Sorento/Carnival 2006-2018 2.0L-2.9L
Brake Pad Fitting Kit A-300 for Hyundai Santa Fe/Kia Sorento/Carnival 2006-2018 2.0L-2.9L - image 1

Brake Pad Fitting Kit A-300 for Hyundai Santa Fe/Kia Sorento/Carnival 2006-2018 2.0L-2.9L

≥ 100 pieces $3.47
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE A-300 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE A-300. Confirm your model and year before ordering.

Make
Model
Year
Engine
HYUNDAI
Santa Fe
2006.01-2018.12
2.0L-2.9L
KIA
Sorento/Carnival
2006.01-2018.12
2.0L-2.9L
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryBrake System
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
A-300
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

A-300 is the reference this brake pad fitting kit is built to, and it is the number a workshop will look up for HYUNDAI Santa Fe and KIA Sorento/Carnival.

The kit is fitted between the pad ears and the caliper bracket, and it is the part that lets the pad slide as it wears instead of binding in one position. A brake pad fitting kit is the small parts that hold the pads in the caliper: the abutment clips, the anti rattle springs and the pin boots, and without them a new set of pads will rattle or seize.

The fitment we have confirmed runs from 2006.01 to 2018.12, split across 2 references in the table, so check the chassis code against the list before you order.

The kit is packed as a complete axle set where the original is sold that way, so both sides of the car are renewed together. Parts are checked for burrs before packing, because a burr on a clip is enough to make a pad bind and overheat on one edge.

A caliper that will not release fully, leaving the wheel hot after a short drive, can be a guide pin bushing that has swollen or seized. A rattle or a knock over bumps that disappears when the brake is applied lightly is the classic sign of worn abutment clips. Brake dust building up on one wheel more than the other, with even pad thickness, points at the hardware rather than at the pad compound.

Torque the caliper and the bracket bolts to the manual figure, then pump the pedal until it is firm before moving the car. Check that each pad slides freely in the bracket by hand before the caliper goes back on, since a tight pad will drag from the first stop. Replace the guide pin boots if they are split, because a boot that lets water in will seize the pin within a season. Buy the kit with the pads rather than after, because the hardware is cheap relative to the labour of opening the brakes twice.

Order A-300 by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.