Home > All Products > Clutch Slave Cylinders > Clutch Slave Cylinder 3C11-7A508-AA for Ford Transit (V184/V185) 2000-2006
Clutch Slave Cylinder 3C11-7A508-AA for Ford Transit (V184/V185) 2000-2006
Clutch Slave Cylinder 3C11-7A508-AA for Ford Transit (V184/V185) 2000-2006 - image 1
Clutch Slave Cylinder 3C11-7A508-AA for Ford Transit (V184/V185) 2000-2006 - image 2

Clutch Slave Cylinder 3C11-7A508-AA for Ford Transit (V184/V185) 2000-2006

≥ 100 pieces $8.58
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 3C11-7A508-AA · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 3C11-7A508-AA. Confirm your model and year before ordering.

Make
Model
Year
Engine
FORD
TRANSIT Bus (FD_ _/ FB_ _/ FS_ _/ FZ_ _/ FC_ _) 2.4 DI RWD (F_B_/ F_C_/ F_A_)
2000.01-2014.08
FORD
TRANSIT CONNECT (P65_/ P70_/ P80_) 1.8 TDCi
2002.06-2013.12
FORD
TRANSIT Platform/Chassis (FM_ _/ FN_ _) 2.4 DI (F_A_/ F_B_/ F_C_/ F_D_) 2.0 TDCi (F_E_/ F_F_) 2.3 16V (F_A_/ F_B_/ F_C_/ F_D_)
2000.01-2006.05
FORD
TRANSIT Platform/Chassis (FM_ _/ FN_ _/ FF_ _) 2.3 16V LPG RWD 2.2 TDCi 2.4 TDCi RWD 3.2 TDCi RWD
2006.04-2014.08
FORD
TRANSIT TOURNEO Bus 2.2 TDCi
2006.07-2014.08
FORD
TRANSIT TOURNEO Bus (FC_ _) 2.0
2000.06-2006.03
FORD
TRANSIT Van (FA_ _) 2.4 DI (FAA_/ FAB_/ FAC_/ FAD_)
2000.01-2014.08
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryClutch Slave Cylinders
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
3C11-7A508-AA
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Our electric fuel pump assembly for 3C11-7A508-AA is made to the original drawing and goes straight on to FORD TRANSIT Bus, TRANSIT CONNECT and TRANSIT Platform/Chassis without modification.

The unit lives inside the fuel tank and is cooled by the fuel around it, which is the reason a pump that is habitually run on an almost empty tank is usually the first one to fail. Because the cartridge, the strainer and the sender share one flange, replacing the whole assembly retires three wear items at once instead of chasing them one by one.

The fitment we have confirmed runs from 2000.01 to 2014.08, split across 7 references in the table, so check the chassis code against the list before you order.

The strainer is a multi layer mesh rated around 60 microns that still passes enough volume at low tank levels, and the outlet flange is supplied with a new sealing ring. The impeller is machined rather than sintered and the armature is balanced, so the unit runs quietly and does not set up the low frequency drone a worn pump is known for.

Intermittent stalling in traffic together with a gauge that jumps is often a single fault, because the sender and the pump share the flange and its earth return. Rough running below a quarter tank that clears after a fill up is the reservoir or the strainer failing to pick up fuel, not a dirty injector. A fuel smell around the tank with no visible leak is often the flange seal, and a distorted seal is usually a pump that was fitted without a new ring.

Compare the new float arm with the old one before fitting. If the arm has to be bent to clear the tank, the gauge will read wrong. Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. Torque the lock ring to the figure in the workshop manual and recheck for seepage after the first ten minutes of running. Each module is packed in a foam lined box with the seal, the lock ring where the application uses one, and a pigtail on versions that need it.

Any doubt about 3C11-7A508-AA fitting your application, message us the chassis number before ordering and we will check it against the drawing.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.