Home > All Products > Engine Cooling > Water Pump > Engine Water Pump 504361653 5801514155 for IVECO Daily Series
Engine Water Pump 504361653 5801514155 for IVECO Daily Series
Engine Water Pump 504361653 5801514155 for IVECO Daily Series - image 1

Engine Water Pump 504361653 5801514155 for IVECO Daily Series

Truck water pump for IVECO Daily Series - short shaft 62 mm, replaces OE 504361653 - MOQ 100 pcs
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 504361653 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 504361653. Confirm your model and year before ordering.

Make
Model
Year
Engine
IVECO
DAILY III Bus 35 S 14/ 50 C 14 (ATPA9FH2)
2004.01-2006.05
IVECO
DAILY III Platform/Chassis 35 C 14
2004.09-2006.04
IVECO
DAILY III Van 35 C 14
1999.07-2006.12
IVECO
DAILY IV Platform/Chassis 50C15
2006.05-2011.08
IVECO
DAILY IV Van 35C15 V/ 35C15 V/P
2006.05-2011.08
IVECO
DAILY V Bus 35S17/ 40C17/ 45C17/ 50C17
2011.09-2014.02
IVECO
DAILY V Platform/Chassis 35C15/ 35S15/ 40C15/ 45C15/ 50C15/ 60C15/ 65C15/ 70C15
2011.09-2014.02
IVECO
DAILY V Van 35C17/ 35S17/ 40C17/ 45C17/ 50C17/ 60C17/ 65C17/ 70C17
2011.09-2014.02
IVECO
DAILY VI Bus 40C15/ 50C15/ 60C15
2014.03
IVECO
DAILY VI Platform/Chassis 35S14/ 35S15/ 35C15/ 40S14/ 40C15/ 50C15/ 60C5/ 65C15/...
2014.03
IVECO
DAILY VI Van 35S15/ 35C15/ 40C15/ 45C15/ 50C15/ 65C15/ 70C15
2014.03
IVECO
MASSIF Pickup 3.0 HPI
2008.10-2011.02
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryWater Pump
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
5043616535801514155BRAC1653
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Our engine water pump for 504361653 is made to the original drawing and goes straight on to IVECO DAILY III Bus, DAILY III Platform/Chassis and DAILY III Van without modification.

An engine water pump is what keeps coolant moving through the block, the head and the radiator, and once the bearing or the seal goes the whole cooling circuit stops working the way it was designed to. The water pump is also the tensioner or the idler for the belt on many engines, which is why a failing bearing often shows up first as a chirp or a wobble rather than as an overheating complaint.

The fitment we have confirmed runs from 1999.07 to 2014.02, split across 12 references in the table, so check the chassis code against the list before you order.

Gasket faces are checked for flatness before packing, because a pump that does not seal against the block will leak at the joint no matter how good the internal seal is. The impeller is a moulded or stamped part balanced before assembly, because an unbalanced impeller at engine speed loads the bearing and shortens seal life.

Overheating that appears at idle or in traffic but clears once the car is moving points at flow, and a slipping or eroded impeller is one of the causes. A squealing belt that comes back after a new belt is fitted often traces to a pump pulley that is no longer running true. On engines where the pump is driven by the timing belt, a seized pump bearing can take the belt with it, so a noisy pump should not be left in service.

Refill with the correct coolant specification and bleed the system properly, since an air pocket will look exactly like a failed pump on the temperature gauge. Turn the pump by hand before fitting the belt, and check that the pulley runs true once the belt is tensioned. Clean the gasket face on the block down to bare metal and check it with a straight edge, because old gasket residue is the most common cause of a repeat leak. Mixing coolant types shortens seal life, so use one specification throughout and do not top up with plain water for long periods.

Order 504361653 by the number on this page; if two numbers are close, send a photo of the old part and we will confirm which one you need.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.