Home > All Products > Brakes > Brake System > Front Disc Brake Pad Set AB31-2L-361 AB for Ford Ranger PX/T6/T7 2012-2023 2.2L/3.2L
Front Disc Brake Pad Set AB31-2L-361 AB for Ford Ranger PX/T6/T7 2012-2023 2.2L/3.2L
Front Disc Brake Pad Set AB31-2L-361 AB for Ford Ranger PX/T6/T7 2012-2023 2.2L/3.2L - image 1

Front Disc Brake Pad Set AB31-2L-361 AB for Ford Ranger PX/T6/T7 2012-2023 2.2L/3.2L

≥ 100 pieces $5.72
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE AB31-2L-361AB · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE AB31-2L-361AB. Confirm your model and year before ordering.

Make
Model
Year
Engine
FORD
EVEREST II (XXM) 3.2 TDCi
2015.09-2023.01
FORD
RANGER (TKE) 2.2 TDCi 4x4
2011.04
FORD
RANGER III (2N/ 2G/ 2P) 2.2 TDCi 4x4
2011.12-2023.01
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Shop by vehicle

More parts for the vehicles this fits

Pick a model to see every part we stock for it, with the OE numbers each one replaces.

Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryBrake System
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
AB31-2L-361ABAB31-2L-361
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

The number AB31-2L-361AB identifies this disc brake pad set, which fits FORD EVEREST II, RANGER and RANGER III as set out in the fitment table.

The pad is a steel backing plate with a friction block bonded to it, and the friction block is shaped to the original rotor sweep so it beds in over the full face. A disc brake pad set is the friction pair that clamps the rotor and turns wheel speed into heat, so it is the part that decides how the car actually pulls up.

The fitment we have confirmed runs from 2011.04 to 2023.01, split across 3 references in the table, so check the chassis code against the list before you order.

A shim or an anti squeal layer sits between the plate and the piston on the applications that use one, and it is fitted rather than left loose in the box. The backing plate is stamped to the original outline and thickness, because a plate that is too thin will flex and a plate that is too thick will not clear the caliper bracket.

Heavy black dust on one wheel only, with the others clean, suggests that caliper is dragging rather than that the pad is wearing normally. A grinding that continues after the car stops moving is the backing plate touching the rotor, which means the friction material is gone. A wear indicator light or a metal on metal scrape is the last warning; at that point the rotor is usually being damaged as well.

Pump the pedal until it is firm before moving the car, then bed the pads in with a series of moderate stops rather than one hard one. Open the bleeder screw slightly when pushing the piston back, so the displaced fluid does not travel back up into the ABS unit. Replace pads as an axle set and check the rotor thickness against the minimum marked on the hub before fitting new pads to a worn disc. Replace the rotors at the same time if they are at or below minimum thickness, scored, or have a lip at the outer edge, since new pads on a worn disc will not bed properly.

The reference AB31-2L-361AB is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.