Home > All Products > Fuel System > Fuel Injector Leak Off Pipe 1473393 for Ford Transit MK7
Fuel Injector Leak Off Pipe 1473393 for Ford Transit MK7
Fuel Injector Leak Off Pipe 1473393 for Ford Transit MK7 - image 1
Fuel Injector Leak Off Pipe 1473393 for Ford Transit MK7 - image 2
Fuel Injector Leak Off Pipe 1473393 for Ford Transit MK7 - image 3
Fuel Injector Leak Off Pipe 1473393 for Ford Transit MK7 - image 4
Fuel Injector Leak Off Pipe 1473393 for Ford Transit MK7 - image 5

Fuel Injector Leak Off Pipe 1473393 for Ford Transit MK7

≥ 100 pieces $8.38
Wholesale price Quotation within 24h · FOB / CIF
OE 1473393 6C1Q-9K022-AG 6C1Q-9K022-AD 9660645280 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 1473393 6C1Q-9K022-AG 6C1Q-9K022-AD 9660645280. Confirm your model and year before ordering.

Make
Model
Year
Engine
Ford
Transit Mk7 Van FA 2.2 TDCi
2006-2014
Ford
Transit Mk7 Bus 2.2 TDCi
2006-2014
Ford
Transit Mk7 Chassis 2.2 TDCi
2006-2014
Ford
Transit Tourneo 2.2 TDCi
2006-2014
Citroen
Jumper II 2.2 HDi
2006-2016
Peugeot
Boxer II 2.2 HDi
2006-2016
Fiat
Ducato III 2.2 Multijet
2006-2011
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryFuel System
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
Supply typeAftermarket replacement
OE / reference numbers
1473393 6C1Q-9K022-AG 6C1Q-9K022-AD 96606452801574L41372367138359514697286C1Q9K022AG6C1Q9K022AD
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Fuel injector leak off pipe 1473393, also sold as 6C1Q-9K022-AG, 6C1Q-9K022-AD and 9660645280, is the return harness for the 2.2 TDCi engine in the 2006 to 2014 Ford Transit Mk7 and Tourneo, and in the Citroen Jumper, Peugeot Boxer and Fiat Ducato of the same period.

Where the later version of this engine uses a moulded nylon rail, this early harness is built as a set of short rubber hoses joined by plastic tee pieces, with a banjo or push fit at each injector and a single outlet that clips to the steel return line on the chassis. The rubber section is what allows the harness to follow the slight movement between the cam cover and the injector tops without fatiguing, and the tee pieces are keyed so the harness can only be fitted one way round. The bore is small, around 3 mm, and that restriction is deliberate: it keeps the return pressure at the level the injector solenoids were calibrated against, so a harness replaced with plain 6 mm fuel hose will run but will give a lumpy idle and a hot start hesitation.

The failure pattern on this part is different from the nylon version. The rubber hardens at the injector ends first, then splits where the hose is pushed over the nipple, so the leak starts as a seep that wicks along the hose and shows as a dark wet line rather than a drip. The tee pieces crack at the branch after the engine has been worked on and the harness has been pulled sideways to get at the injectors. On vans that run high mileage with short stop start cycles, the harness also chafes against the engine cover stud, which cuts the outer layer and leaves the braid showing before it leaks.

Fitting notes. Label the four positions before removing anything, because the harness legs are similar in length and can be crossed. Undo the injector fittings with a flare nut spanner, not an open ender, and hold the injector body so the nipple does not turn. Fit the new harness starting at the cylinder furthest from the outlet so the last leg has slack to reach, clip the tee pieces into their brackets, and make sure no hose is pulled tight around a corner. Prime by cycling the ignition three or four times before cranking, then check every joint for weeping at idle and again after a 20 minute drive. Diesel on a hot manifold leaves a smell for days, so a small leak is easy to confirm by smell before it is visible.

Supplied as one complete harness with the correct tee pieces and clips. Twelve month warranty.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.