Home > All Products > Hardware & Fasteners > Lift Supports > Hood Gas Strut 57251-SG000 for Subaru Forester (SJ) 2013-2018 2.0L/2.5L FB20/FB25
Hood Gas Strut 57251-SG000 for Subaru Forester (SJ) 2013-2018 2.0L/2.5L FB20/FB25
Hood Gas Strut 57251-SG000 for Subaru Forester (SJ) 2013-2018 2.0L/2.5L FB20/FB25 - image 1
Hood Gas Strut 57251-SG000 for Subaru Forester (SJ) 2013-2018 2.0L/2.5L FB20/FB25 - image 2

Hood Gas Strut 57251-SG000 for Subaru Forester (SJ) 2013-2018 2.0L/2.5L FB20/FB25

≥ 100 pieces $3.47
Wholesale price Quotation within 24h · FOB / CIF
MOQ 100 pcs · OE 57251-SG000 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE 57251-SG000. Confirm your model and year before ordering.

Make
Model
Year
Engine
SUBARU
Forester (SJ)
2013.01-2018.12
2.0L/2.5L FB20/FB25
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryLift Supports
MOQ100 pcs
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
OE / reference numbers
57251-SG000
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

This listing is for one electric fuel pump assembly with reference 57251-SG000, covering SUBARU Forester.

On this design the pump and the sender are supplied as one unit, which is how the vehicle maker sells the part and the only way to renew both without cutting into the tank wiring. This is a complete in-tank module rather than a bare cartridge: pump, plastic reservoir, level sender and outlet flange arrive already assembled, so the tank only has to come down once.

The fitment we have confirmed runs 2013.01 to 2018.12, and it is the single reference listed in the table, so check the chassis code before you order.

Terminals are tin plated and the connector body is keyed to the original pin layout, so the factory plug clicks straight in without an adapter harness. The impeller is machined rather than sintered and the armature is balanced, so the unit runs quietly and does not set up the low frequency drone a worn pump is known for.

A pump on its way out usually shows up first as a lean code at high load and a hesitation above 4000 rpm, long before it stops altogether. A sudden no-start with good spark and a dry rail almost always comes back to the pump or its supply, and the pump is the cheaper of the two to rule out. A fuel smell around the tank with no visible leak is often the flange seal, and a distorted seal is usually a pump that was fitted without a new ring.

Clean the top of the tank before opening it so no grit drops into the reservoir while the module is out. Fit a new flange seal every time; a reused ring is the most common cause of a fuel smell after the job. Torque the lock ring to the figure in the workshop manual and recheck for seepage after the first ten minutes of running. Each module is packed in a foam lined box with the seal, the lock ring where the application uses one, and a pigtail on versions that need it.

The reference 57251-SG000 is stamped on the box, so the part that arrives is the part that was quoted.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.