Product details
About this part
Ignition coil 22433-AA680 is the coil on plug unit for the Subaru FB20 and FB25 boxer engines in the Forester SJ, Legacy V, Outback, XV, Impreza GJ and BRZ, and in the Toyota GT 86 that shares the same engine, from 2012 to 2019.
Four of these sit on top of the flat four, two on each side, in short wells that angle outwards because of the boxer layout. The coil is a compact three pin unit with the connector entering the side of the head and a boot that is shorter than on an inline engine, since the plug does not sit at the bottom of a deep well. The igniter is integrated and the whole assembly is potted, and the mounting boss is offset so the coil clears the fuel rail on the right hand bank. Subaru used this coil across the whole FB engine family, which is why it also appears on the Toyota badged coupe.
How they fail. On these engines a failing coil gives a misfire that is felt as a vibration through the whole car at idle rather than a shake, because a flat four is well balanced until one cylinder drops out. A P0301 to P0304 code names the corner, and the misfire count usually climbs with engine temperature. The coil fails at the shoulder where the body meets the boot, a spot that sees both heat and the flexing of the engine under load, and once the potting cracks the spark finds its way out. On a Forester or XV used on wet roads the front coils also suffer from water thrown up past the splash shields, and a boot that no longer seals will let moisture in and cause a cold start misfire that clears once the engine bay dries out.
Fitting notes. Remove the engine cover and the air intake trunking on the right hand side to get at the rear coils. Release the connector latch, undo the single bolt, and pull the coil out along its axis, not sideways, because the boot grips the plug. Look for a crack at the shoulder and for a grey tracking line on the boot. Check the plug, and if the gap has opened beyond spec, replace all four plugs before the new coil goes in. Put dielectric grease in the boot, seat the coil, tighten the bolt to 8 Nm, and make sure the connector clicks. Clear the codes and run the engine at idle with the scan tool on the misfire counters.
Supplied as one coil with boot and spring. Four are needed per vehicle. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.