Product details
About this part
Haval H6 owners chasing a misfire usually end up at 3705100XEC01, the coil that Great Wall fits to the GW4C20 2.0 turbo in the H6, H6 Coupe, H8 and H9, and to the later F7. It is the earlier revision of the same coil family as 3705100XEC15, and the two numbers are cross listed because the difference is in the suppressor and the boot compound rather than the mounting or the connector.
The coil is a pencil type with a three pin connector, an integral igniter, a mounting eye with a steel sleeve and a boot that reaches about 90 mm down into the cam cover well. The GW4C20 runs direct injection at a relatively high compression ratio, and the coil is asked to fire a plug with a 0.7 mm gap under boost, so the secondary insulation is thicker than on an older port injection coil. The body is potted and the boot is a high temperature silicone rather than the cheaper EPDM used on some aftermarket copies, which matters on an engine whose cam cover runs hot.
Symptoms follow the usual pattern: a stumble at light throttle, a P030x code, and on a direct injection engine a strong smell of fuel and black smoke if the misfire is bad, because the injector keeps spraying into a cylinder that is not firing. The H6 is a heavy vehicle and the misfire is often first felt as a hesitation when pulling away from a junction. Carbon tracking inside the boot is common after 80,000 km, and so is a coil that has been contaminated by oil from a leaking cam cover gasket, which softens the boot and lets the spark escape. A flashing engine light means stop driving, because unburnt fuel will destroy the catalyst.
Take off the engine cover, release the connector latch, undo the bolt and withdraw the coil. Check that the well is dry and free of oil, and if the cam cover gasket is weeping, fix that first or the new coil will fail the same way. Inspect the plug, set the gap or replace the set, grease the new boot, seat the coil and torque to 8 Nm. Clear the codes, run the engine to operating temperature and drive under load before signing the job off.
Supplied as one coil with boot and spring. Four are needed per vehicle. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.