Product details
About this part
Ignition coil 483Q-18-100, also catalogued as DQG3215C, is the coil on plug unit for the 1.8 litre 483Q engine in the Haima 3 saloon, the Haima Freema and the Haima Huandong, from 2007 to 2017.
The 483Q is the Mazda derived twin cam 1.8 used in these FAW Haima cars, and it carries four of these coils, one per cylinder, sitting in wells machined into the aluminium cam cover. The coil is a short pencil type with a two pin connector on the side, a slim body and a boot with two sealing rings, and it is held down by a single bolt through a metal bush. Inside, the primary and secondary windings are wound on a laminated core and potted in epoxy with the igniter bonded to the top of the assembly, so the whole unit is sealed against the oil mist that builds up under the cover on these engines.
How they fail. The common complaint is a rough idle that smooths out as soon as the revs come up, a check engine light and a single cylinder misfire code, often after the car has been sitting in damp weather. The boot on this coil is the weak point: it takes a set and stops sealing, water gets into the well, and the spark finds its way down the outside of the silicone to earth. That leaves a fine dark line on the boot and a rust ring on the plug hex. Because these cars are often serviced cheaply and the plugs left in for a long time, a worn plug with an open gap is a frequent root cause, and a new coil fitted without new plugs will not last. A coil that has failed hot, when the engine is at temperature, will test normal after it cools.
Fitting notes. Work with the engine cold. Release the connector latch, undo the coil bolt, and pull the coil out by the body, not the wiring. Blow out the well, then take the plug out and look at the insulator: a black band at the base means the boot has been leaking. Fit four new plugs of the correct heat range while the coils are off, put a thin smear of dielectric grease in the boot, and seat the coil until it clips onto the plug terminal. Tighten the bolt to 8 Nm and make sure the connector clicks home. Clear the codes, then run the engine at idle for ten minutes and check the misfire counters with a scan tool before the cover goes back on.
Supplied as one coil with boot and spring. Four are needed per vehicle. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.