Home > All Products > Ignition & Tune-Up > Ignition Coil > Ignition Coil Rubber Boot NE14T0030190 for Changan CS75
Ignition Coil Rubber Boot NE14T0030190 for Changan CS75
Ignition Coil Rubber Boot NE14T0030190 for Changan CS75 - image 1
Ignition Coil Rubber Boot NE14T0030190 for Changan CS75 - image 2
Ignition Coil Rubber Boot NE14T0030190 for Changan CS75 - image 3
Ignition Coil Rubber Boot NE14T0030190 for Changan CS75 - image 4
Ignition Coil Rubber Boot NE14T0030190 for Changan CS75 - image 5

Ignition Coil Rubber Boot NE14T0030190 for Changan CS75

≥ 200 pieces $0.61
Wholesale price Quotation within 24h · FOB / CIF
OE NE14T0030190 NE14T003-0190 3705010-NE01 · Sample order accepted
Request wholesale quote
0
Your cart is empty
Verified fitment

Fits these vehicles

Applications confirmed against OE NE14T0030190 NE14T003-0190 3705010-NE01. Confirm your model and year before ordering.

Make
Model
Year
Engine
Changan
UNI-K 2.0T JL486ZQ5
2021-2026
Changan
UNI-T 1.5T JL473ZQ5
2023-2026
Changan
UNI-V 1.5T JL473ZQ7
2022-2026
Changan
CS35 Plus 1.4T JL473ZQ9
2022-2026
Changan
CS55 Plus 1.5T JL473ZQ7
2022-2026
Changan
CS95 2.0T JL486ZQ4
2023-2026
Changan
Oshan X7 Plus 1.5T JL473ZQA
2021-2026
Not sure about the fitment? Send us your VIN or OE number — we reply within 24 hours.
Specifications

Technical parameters

MaterialPlastic/Rubber
BrandFobautoparts
CategoryIgnition Coil
Place of originZhejiang, China
PackingNeutral white box + brown carton; custom color box, labels and gifts available above MOQ
Supply typeAftermarket replacement
OE / reference numbers
NE14T0030190 NE14T003-0190 3705010-NE0170640-003MIC-01573705010NE01
ShippingDHL / UPS / FedEx / Aramex / Sea freight
DeliveryConfirmed in the quotation or order confirmation
WarrantyAs stated in the quotation or order terms
ServiceOEM / ODM custom service, private label and packaging
PaymentT/T, L/C, D/P, D/A, PayPal, Western Union, MoneyGram, Credit Card, Trade Assurance
Secure paymentTrade Assurance, T/T and L/C accepted; payment secured by your bank.
Inspection before shipmentInspection and photographs can be arranged when included in the quotation or order.
Warranty termsAny warranty, replacement or credit terms are stated in the applicable quotation or order confirmation.
Product details

About this part

Ignition coil NE14T0030190, also listed as NE14T003-0190 and 3705010-NE01, is the pencil type coil on plug unit used on the Changan UNI-K 2.0T from 2021, the UNI-T 1.5T from 2023, the UNI-V 1.5T from 2022 and the CS35 Plus 1.4T from 2022.

It is a single spark coil that sits directly on top of the spark plug, so there is no high tension lead to go brittle or leak. Inside the plastic body a laminated iron core carries a primary winding of a few hundred turns of fine enamel wire and a secondary winding of many thousands of turns, both potted in epoxy so that vibration and heat cannot move them. The electronics that switch the primary current are built into the top of the coil, which is why the connector has three or four pins rather than two. When the module interrupts the primary current the field collapses and the secondary produces the 25 to 35 kV needed to jump the plug gap. The long silicone rubber boot on the bottom is the part that reaches down through the cylinder head cover into the plug well; a spring inside it makes the contact to the plug terminal, and the boot itself insulates the joint from the surrounding metal.

The engines listed here are the Changan NE and JL families: JL486ZQ4 and JL486ZQ5 2.0 litre turbo, JL473ZQ5, JL473ZQ7, JL473ZQ9 and JL473ZQA 1.4 and 1.5 litre turbo. They share the same coil fixing and the same connector, so one coil covers the range, and a workshop that stocks this number can serve UNI-K, UNI-T, UNI-V, CS35 Plus, CS55 Plus, CS95 and Oshan X7 Plus at the same time.

How they fail. The classic symptom is a single cylinder misfire that shows up first as a rough idle and a flashing engine lamp under load, and a fault code naming one cylinder rather than a random misfire. Because the coil is asked to fire under compression, a coil that is breaking down often works when cold and drops out once the engine bay heat soaks. A cracked epoxy top, a brown burn track down the side of the boot, or a boot that has gone hard and stuck to the plug are all signs of the same failure. Oil in the plug well from a perished valve cover tube seal will destroy a new coil quickly, so that seal has to be checked at the same time.

Fitting notes. Unplug the connector by releasing the latch rather than pulling the wires, undo the single retaining bolt, and pull the coil straight up by the body, never by the boot. Blow the plug well clean before the new coil goes in, check the plug gap and condition, and put a thin smear of dielectric grease inside the boot so it does not bond to the plug. Tighten the bolt gently, around 8 to 10 Nm, because the thread is in aluminium. If a misfire follows the coil when it is swapped to another cylinder, the coil is at fault; if it stays on the same cylinder, look at the plug, the injector or the compression.

Supplied as one new coil with the rubber boot fitted, individually boxed and tested before packing. Twelve month warranty.

Frequently asked questions

Q: What kind of parts do you supply?

A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.

Q: Do you test all your goods before delivery?

A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.

Q: How long is the delivery time?

A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.

Q: What is your terms of packing?

A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.

Q: How can I get the warranty?

A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.

Get a quote

Tell us what you need

Tell us the OE numbers, the quantity you move and your target market. We reply with FOB or CIF pricing, MOQ, lead time and packing options — plus the application list for your market.

  • Quotation comes with the application list and OE cross-reference
  • MOQ, FOB or CIF price, lead time and packing in one reply
  • Neutral packing as standard, or your branded boxes with authorisation
  • Reply within 24 hours on working days

Write to us

Leave a note and we'll get back to you as soon as possible.

I consent to the processing of my personal data for the purposes indicated*.