Product details
About this part
Ignition coil 27300-2E000, also sold as 27301-2E000 and UF651, is the coil on plug unit for the Hyundai and Kia Nu, Gamma and Theta GDI and MPI four cylinder engines in the i40, ix35, Tucson TL, Elantra, Sonata, i30, Sportage III and IV, Carens IV, Optima, Soul II and Cerato III, from 2007 to 2023.
One coil per cylinder, set into a well in the plastic or alloy cam cover, with a three pin connector on the side of the head, a mounting eye for a single bolt and a long boot with two sealing ribs. On the GDI engines the coil has to fire a plug that sits very deep in a direct injection head, so the boot is longer than on the port injected versions and the lower part is fitted with an additional insulating sleeve. The igniter is built into the coil and the whole unit is potted, and the earlier 27300 and later 27301 numbers are the same part.
How they fail. On a GDI Hyundai or Kia the first symptom is often a slight hesitation under light throttle at 1500 to 2000 rpm that no fault code records, and only later does it become a hard misfire with a flashing light. The direct injection engines run hot and lean, and the coil potting cracks at the shoulder where the tower meets the boot, so the spark escapes to the head when the engine is hot and the fault disappears after a rest. Water in the plug well after a wash is the second common cause, and a boot that has swollen from oil contamination will not seal even if it looks intact. Cars that have done high mileage on the original plugs often have two coils on the way out at the same time.
Fitting notes. Remove the engine cover, press the connector latch and pull the plug off, then undo the coil bolt and draw the coil out along its axis. Check the well for oil and water and dry it out completely. On GDI engines take care not to drop anything into the deep well, and use a magnetic plug socket to lift the plug out. Set the new plug gap to the figure for the engine, fit it to torque, apply dielectric grease to the boot, and seat the coil until it clicks onto the plug before tightening the bolt to 8 Nm. Clear the codes and confirm the misfire counters stay at zero during a hot idle and a loaded run.
Supplied as one coil with boot and spring contact fitted. Twelve month warranty.
Frequently asked questions
Q: What kind of parts do you supply?
A: We are a trading company, auto parts supplier, and sourcing partner. We source fuel pump assemblies, filters, ignition coils, injectors, sensors, connector wires and other automotive parts through relevant suppliers. We are not a manufacturer; product and supplier details are confirmed for each quotation.
Q: Do you test all your goods before delivery?
A: Inspection and sample arrangements depend on the product and order. We can coordinate supplier documents, photos, samples, or pre-shipment inspection when included in the quotation. Please confirm the required scope before ordering.
Q: How long is the delivery time?
A: Lead time depends on supplier availability, product requirements, quantity, packing, and destination. The applicable lead time is stated in the quotation or order confirmation.
Q: What is your terms of packing?
A: Neutral packing is our standard: goods are packed in neutral white boxes and brown cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after receiving your authorization letters. Above a minimum order quantity we also handle custom packaging and help with the design: printed color boxes, color labels, anti-counterfeit / security labels, and even small promotional items such as branded pens, mugs, baseball caps and T-shirts with your logo. Tell us your order quantity and requirements and we will confirm exactly what can be customized for your order.
Q: How can I get the warranty?
A: First of all, please take a photo when you receive the goods to confirm that the goods are in good condition, and then contact our sales, send the photo to us, we will record for you.